Add eOS I3 config files

2023-02-28 10:41:11 +00:00 · 2023-02-28 10:41:11 +00:00 · 139c514310
parent fe765870e2
commit 139c514310
39 changed files with 3931 additions and 0 deletions
--- a/config/autostart/firewall-applet.desktop
+++ b/config/autostart/firewall-applet.desktop
@ -0,0 +1,100 @@
+[Desktop Entry]
+Name=Firewall Applet
+Name[ar]=التطبيق الصغير للجدار الناري
+Name[as]=ফায়াৰৱাল এপ্লেট
+Name[bg]=Аплет на защитната стена
+Name[bn_IN]=ফায়ারওয়াল অ্যাপ্লেট
+Name[ca]=Miniaplicació del tallafoc
+Name[cs]=Aplet brány firewall
+Name[da]=Firewall-applet
+Name[de]=Firewall-Applet
+Name[el]=Μικροεφαρμογή τείχους προστασίας
+Name[en_GB]=Firewall Applet
+Name[en_US]=Firewall Applet
+Name[es]=Applet del cortafuegos
+Name[et]=Tulemüüri aplett
+Name[eu]=Suhesiaren applet-a
+Name[fi]=Palomuurisovelma
+Name[fr]=Appliquette pare-feu
+Name[gl]=Applet de devasa
+Name[gu]=ફાયરવોલ ઍપલેટ
+Name[hi]=फ़ायरवॉल एप्लेट
+Name[hu]=Tűzfal kisalkalmazás
+Name[ia]=Applet de parafoco
+Name[id]=Aplikasi Firewall
+Name[it]=Applet firewall
+Name[ja]=ファイアウォールアプレット
+Name[kn]=ಫೈರ್ವಾಲ್ ಆಪ್ಲೆಟ್
+Name[ko]=방화벽 애플릿
+Name[lt]=Užkardos programėlė
+Name[ml]=ഫയര്‍വോള്‍ ആപ്ലെറ്റ്
+Name[mr]=फायरवॉल ॲपलेट
+Name[nl]=Firewall applet
+Name[or]=ଅଗ୍ନିକବଚ ଆପଲେଟ
+Name[pa]=ਫਾਇਰਵਾਲ ਐਪਲੈੱਟ
+Name[pl]=Aplet zapory sieciowej
+Name[pt]=Míni aplicação de Firewall
+Name[pt_BR]=Miniaplicativo do Firewall
+Name[ru]=Апплет межсетевого экрана
+Name[sk]=Aplet pre firewall
+Name[sr]=Аплет заштитног зида
+Name[sv]=Panelprogram för brandvägg
+Name[ta]=ஃபயர்வால் அப்பலெட்
+Name[te]=ఫైర్వాల్ ఆప్లెట్
+Name[tr]=Güvenlik Duvarı Uygulaması
+Name[uk]=Аплет брандмауера
+Name[zh_CN]=防火墙小程序
+Name[zh_TW]=防火牆面板程式
+Comment=Firewall Applet
+Comment[ar]=التطبيق الصغير للجدار الناري
+Comment[as]=ফায়াৰৱাল এপ্লেট
+Comment[bg]=Аплет на защитната стена
+Comment[bn_IN]=ফায়ারওয়াল অ্যাপ্লেট
+Comment[ca]=Miniaplicació del tallafoc
+Comment[cs]=Aplet brány firewall
+Comment[da]=Firewall-applet
+Comment[de]=Firewall-Applet
+Comment[el]=Μικροεφαρμογή τείχους προστασίας
+Comment[en_GB]=Firewall Applet
+Comment[en_US]=Firewall Applet
+Comment[es]=Applet del cortafuegos
+Comment[et]=Tulemüüri aplett
+Comment[eu]=Suhesiaren applet-a
+Comment[fi]=Palomuurisovelma
+Comment[fr]=Appliquette pare-feu
+Comment[gl]=Applet de devasa
+Comment[gu]=ફાયરવોલ ઍપલેટ
+Comment[hi]=फ़ायरवॉल एप्लेट
+Comment[hu]=Tűzfal kisalkalmazás
+Comment[ia]=Applet de parafoco
+Comment[id]=Aplikasi Firewall
+Comment[it]=Applet firewall
+Comment[ja]=ファイアウォールアプレット
+Comment[kn]=ಫೈರ್ವಾಲ್ ಆಪ್ಲೆಟ್
+Comment[ko]=방화벽 애플릿
+Comment[lt]=Užkardos programėlė
+Comment[ml]=ഫയര്‍വോള്‍ ആപ്ലെറ്റ്
+Comment[mr]=फायरवॉल ॲपलेट
+Comment[nl]=Firewall applet
+Comment[or]=ଅଗ୍ନିକବଚ ଆପଲେଟ
+Comment[pa]=ਫਾਇਰਵਾਲ ਐਪਲੈੱਟ
+Comment[pl]=Aplet zapory sieciowej
+Comment[pt]=Míni aplicação de Firewall
+Comment[pt_BR]=Miniaplicativo do Firewall
+Comment[ru]=Апплет межсетевого экрана
+Comment[sk]=Aplet pre firewall
+Comment[sr]=Аплет заштитног зида
+Comment[sv]=Panelprogram för brandvägg
+Comment[ta]=ஃபயர்வால் அப்பலெட்
+Comment[te]=ఫైర్వాల్ ఆప్లెట్
+Comment[tr]=Güvenlik Duvarı Uygulaması
+Comment[uk]=Аплет брандмауера
+Comment[zh_CN]=防火墙小程序
+Comment[zh_TW]=防火牆面板程式
+Icon=firewall-applet
+Categories=System;Settings;Security;
+Exec=/usr/bin/firewall-applet
+Type=Application
+StartupNotify=true
+Terminal=false
+Hidden=true
--- a/config/dunst/dunstrc
+++ b/config/dunst/dunstrc
@ -0,0 +1,437 @@
+# See dunst(5) for all configuration options
+
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = none
+
+    ### Geometry ###
+
+    # dynamic width from 0 to 300
+    # width = (0, 300)
+    # constant width of 300
+    width = 300
+
+    # The maximum height of a single notification, excluding the frame.
+    height = 300
+
+    # Position the notification in the top right corner
+    origin = bottom-right
+
+    # Offset from the origin
+    offset = 30x40
+
+    # Scale factor. It is auto-detected if value is 0.
+    scale = 0
+
+    # Maximum number of notification (0 means no limit)
+    notification_limit = 5
+
+    ### Progress bar ###
+
+    # Turn on the progess bar. It appears when a progress hint is passed with
+    # for example dunstify -h int:value:12
+    progress_bar = true
+
+    # Set the progress bar height. This includes the frame, so make sure
+    # it's at least twice as big as the frame width.
+    progress_bar_height = 10
+
+    # Set the frame width of the progress bar
+    progress_bar_frame_width = 1
+
+    # Set the minimum width for the progress bar
+    progress_bar_min_width = 150
+
+    # Set the maximum width for the progress bar
+    progress_bar_max_width = 300
+
+
+    # Show how many messages are currently hidden (because of
+    # notification_limit).
+    indicate_hidden = yes
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+    transparency = 16
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Padding between text and icon.
+    text_icon_padding = 0
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 1
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#7f3fbf"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = auto
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 0
+
+    ### Text ###
+
+    font = Noto Sans Regular 9
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <https://docs.gtk.org/Pango/pango_markup.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%s</b>\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Vertical alignment of message text and icon.
+    # Possible values are "top", "center" and "bottom".
+    vertical_alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = true
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale small icons up to this size, set to 0 to disable. Helpful
+    # for e.g. small files or high-dpi screens. In case of conflict,
+    # max_icon_size takes precedence over this.
+    min_icon_size = 0
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 32
+
+    # Paths to default icons.
+    #icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+    icon_path = /usr/share/icons/Qogir/16/status:/usr/share/icons/Qogir/16/devices/:/usr/share/icons/Qogir/16/apps/:/usr/share/pixmaps/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = false
+
+    # Maximum amount of notifications kept in history
+    history_length = 0
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/xdg-open
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 7
+
+    # Ignore the dbus closeNotification message.
+    # Useful to enforce the timeout set by dunst configuration. Without this
+    # parameter, an application may close the notification sent before the
+    # user defined timeout.
+    ignore_dbusclose = false
+
+    ### Wayland ###
+    # These settings are Wayland-specific. They have no effect when using X11
+
+    # Uncomment this if you want to let notications appear under fullscreen
+    # applications (default: overlay)
+    # layer = top
+
+    # Set this to true to use X11 output on Wayland.
+    force_xwayland = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines list of actions for each mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: Invoke the action determined by the action_name rule. If there is no
+    #              such action, open the context menu.
+    # * open_url: If the notification has exactly one url, open it. If there are multiple
+    #             ones, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    # * context: Open context menu for the notification.
+    # * context_all: Open context menu for all notifications.
+    # These values can be strung together for each mouse event, and
+    # will be executed in sequence.
+    mouse_left_click = close_current
+    mouse_middle_click = do_action, close_current
+    mouse_right_click = close_all
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#28143c"
+    foreground = "#ffffff"
+    timeout = 5
+    # Icon for notifications with low urgency, uncomment to enable
+    icon = /usr/share/icons/Arc-X-D/status/16/dialog-information.png
+
+[urgency_normal]
+    background = "#28143c"
+    foreground = "#ffffff"
+    timeout = 5
+    # Icon for notifications with normal urgency, uncomment to enable
+    icon = /usr/share/icons/Arc-X-D/status/16/dialog-question.png
+
+[urgency_critical]
+    background = "#28143c"
+    foreground = "#ffffff"
+    frame_color = "#ff7f7f"
+    timeout = 120
+    # Icon for notifications with critical urgency, uncomment to enable
+    icon = /usr/share/icons/Arc-X-D/status/16/dialog-warning.png
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    set_category
+#    timeout
+#    urgency
+#    skip_display
+#    history_ignore
+#    action_name
+#    word_wrap
+#    ellipsize
+#    alignment
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    skip_display = true
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+[stack-volumes]
+    appname = "some_volume_notifiers"
+    set_stack_tag = "volume"
+#
+# vim: ft=cfg
--- a/config/example.picom.conf
+++ b/config/example.picom.conf
@ -0,0 +1,428 @@
+#################################
+#             Shadows           #
+#################################
+
+
+# Enabled client-side shadows on windows. Note desktop windows
+# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow,
+# unless explicitly requested using the wintypes option.
+#
+# shadow = false
+shadow = true;
+
+# The blur radius for shadows, in pixels. (defaults to 12)
+# shadow-radius = 12
+shadow-radius = 7;
+
+# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
+# shadow-opacity = .75
+
+# The left offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-x = -15
+shadow-offset-x = -7;
+
+# The top offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-y = -15
+shadow-offset-y = -7;
+
+# Red color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-red = 0
+
+# Green color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-green = 0
+
+# Blue color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-blue = 0
+
+# Hex string color value of shadow (#000000 - #FFFFFF, defaults to #000000). This option will override options set shadow-(red/green/blue)
+# shadow-color = "#000000"
+
+# Specify a list of conditions of windows that should have no shadow.
+#
+# examples:
+#   shadow-exclude = "n:e:Notification";
+#
+# shadow-exclude = []
+shadow-exclude = [
+  "name = 'Notification'",
+  "class_g = 'Conky'",
+  "class_g ?= 'Notify-osd'",
+  "class_g = 'Cairo-clock'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+# Specify a list of conditions of windows that should have no shadow painted over, such as a dock window.
+# clip-shadow-above = []
+
+# Specify a X geometry that describes the region in which shadow should not
+# be painted in, such as a dock window region. Use
+#    shadow-exclude-reg = "x10+0+0"
+# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
+#
+# shadow-exclude-reg = ""
+
+# Crop shadow of a window fully on a particular Xinerama screen to the screen.
+# xinerama-shadow-crop = false
+
+
+#################################
+#           Fading              #
+#################################
+
+
+# Fade windows in/out when opening/closing and when opacity changes,
+#  unless no-fading-openclose is used.
+# fading = false
+fading = true;
+
+# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
+# fade-in-step = 0.028
+fade-in-step = 0.03;
+
+# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
+# fade-out-step = 0.03
+fade-out-step = 0.03;
+
+# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
+# fade-delta = 10
+
+# Specify a list of conditions of windows that should not be faded.
+# fade-exclude = []
+
+# Do not fade on window open/close.
+# no-fading-openclose = false
+
+# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
+# no-fading-destroyed-argb = false
+
+
+#################################
+#   Transparency / Opacity      #
+#################################
+
+
+# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
+# inactive-opacity = 1
+inactive-opacity = 0.8;
+
+# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
+# frame-opacity = 1.0
+frame-opacity = 0.7;
+
+# Let inactive opacity set by -i override the '_NET_WM_WINDOW_OPACITY' values of windows.
+# inactive-opacity-override = true
+inactive-opacity-override = false;
+
+# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
+# active-opacity = 1.0
+
+# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
+# inactive-dim = 0.0
+
+# Specify a list of conditions of windows that should never be considered focused.
+# focus-exclude = []
+focus-exclude = [ "class_g = 'Cairo-clock'" ];
+
+# Use fixed inactive dim value, instead of adjusting according to window opacity.
+# inactive-dim-fixed = 1.0
+
+# Specify a list of opacity rules, in the format `PERCENT:PATTERN`,
+# like `50:name *= "Firefox"`. picom-trans is recommended over this.
+# Note we don't make any guarantee about possible conflicts with other
+# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
+# example:
+#    opacity-rule = [ "80:class_g = 'URxvt'" ];
+#
+# opacity-rule = []
+
+
+#################################
+#           Corners             #
+#################################
+
+# Sets the radius of rounded window corners. When > 0, the compositor will
+# round the corners of windows. Does not interact well with
+# `transparent-clipping`.
+corner-radius = 0
+
+# Exclude conditions for rounded corners.
+rounded-corners-exclude = [
+  "window_type = 'dock'",
+  "window_type = 'desktop'"
+];
+
+
+#################################
+#     Background-Blurring       #
+#################################
+
+
+# Parameters for background blurring, see the *BLUR* section for more information.
+# blur-method =
+# blur-size = 12
+#
+# blur-deviation = false
+#
+# blur-strength = 5
+
+# Blur background of semi-transparent / ARGB windows.
+# Bad in performance, with driver-dependent behavior.
+# The name of the switch may change without prior notifications.
+#
+# blur-background = false
+
+# Blur background of windows when the window frame is not opaque.
+# Implies:
+#    blur-background
+# Bad in performance, with driver-dependent behavior. The name may change.
+#
+# blur-background-frame = false
+
+
+# Use fixed blur strength rather than adjusting according to window opacity.
+# blur-background-fixed = false
+
+
+# Specify the blur convolution kernel, with the following format:
+# example:
+#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
+#
+# blur-kern = ""
+blur-kern = "3x3box";
+
+
+# Exclude conditions for background blur.
+# blur-background-exclude = []
+blur-background-exclude = [
+  "window_type = 'dock'",
+  "window_type = 'desktop'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+#################################
+#       General Settings        #
+#################################
+
+# Enable remote control via D-Bus. See the man page for more details.
+# dbus = true
+
+# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
+# daemon = false
+
+# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
+# `xrender` is the default one.
+#
+# backend = "glx"
+backend = "xrender";
+
+# Enable/disable VSync.
+# vsync = false
+vsync = true;
+
+# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
+# dbus = false
+
+# Try to detect WM windows (a non-override-redirect window with no
+# child that has 'WM_STATE') and mark them as active.
+#
+# mark-wmwin-focused = false
+mark-wmwin-focused = true;
+
+# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
+# mark-ovredir-focused = false
+mark-ovredir-focused = true;
+
+# Try to detect windows with rounded corners and don't consider them
+# shaped windows. The accuracy is not very high, unfortunately.
+#
+# detect-rounded-corners = false
+detect-rounded-corners = true;
+
+# Detect '_NET_WM_WINDOW_OPACITY' on client windows, useful for window managers
+# not passing '_NET_WM_WINDOW_OPACITY' of client windows to frame windows.
+#
+# detect-client-opacity = false
+detect-client-opacity = true;
+
+# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window,
+# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy,
+# provided that the WM supports it.
+#
+# use-ewmh-active-win = false
+
+# Unredirect all windows if a full-screen opaque window is detected,
+# to maximize performance for full-screen windows. Known to cause flickering
+# when redirecting/unredirecting windows.
+#
+# unredir-if-possible = false
+
+# Delay before unredirecting the window, in milliseconds. Defaults to 0.
+# unredir-if-possible-delay = 0
+
+# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
+# unredir-if-possible-exclude = []
+
+# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows
+# in the same group focused at the same time.
+#
+# detect-transient = false
+detect-transient = true;
+
+# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same
+# group focused at the same time. This usually means windows from the same application
+# will be considered focused or unfocused at the same time.
+# 'WM_TRANSIENT_FOR' has higher priority if detect-transient is enabled, too.
+#
+# detect-client-leader = false
+
+# Resize damaged region by a specific number of pixels.
+# A positive value enlarges it while a negative one shrinks it.
+# If the value is positive, those additional pixels will not be actually painted
+# to screen, only used in blur calculation, and such. (Due to technical limitations,
+# with use-damage, those pixels will still be incorrectly painted to screen.)
+# Primarily used to fix the line corruption issues of blur,
+# in which case you should use the blur radius value here
+# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`,
+# with a 5x5 one you use `--resize-damage 2`, and so on).
+# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
+#
+# resize-damage = 1
+
+# Specify a list of conditions of windows that should be painted with inverted color.
+# Resource-hogging, and is not well tested.
+#
+# invert-color-include = []
+
+# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer.
+# Might cause incorrect opacity when rendering transparent content (but never
+# practically happened) and may not work with blur-background.
+# My tests show a 15% performance boost. Recommended.
+#
+# glx-no-stencil = false
+
+# GLX backend: Avoid rebinding pixmap on window damage.
+# Probably could improve performance on rapid window content changes,
+# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
+# Recommended if it works.
+#
+# glx-no-rebind-pixmap = false
+
+# Disable the use of damage information.
+# This cause the whole screen to be redrawn everytime, instead of the part of the screen
+# has actually changed. Potentially degrades the performance, but might fix some artifacts.
+# The opposing option is use-damage
+#
+# no-use-damage = false
+use-damage = true;
+
+# Use X Sync fence to sync clients' draw calls, to make sure all draw
+# calls are finished before picom starts drawing. Needed on nvidia-drivers
+# with GLX backend for some users.
+#
+# xrender-sync-fence = false
+
+# GLX backend: Use specified GLSL fragment shader for rendering window
+# contents. Read the man page for a detailed explanation of the interface.
+#
+# window-shader-fg = "default"
+
+# Use rules to set per-window shaders. Syntax is SHADER_PATH:PATTERN, similar
+# to opacity-rule. SHADER_PATH can be "default". This overrides window-shader-fg.
+#
+# window-shader-fg-rule = [
+#   "my_shader.frag:window_type != 'dock'"
+# ]
+
+# Force all windows to be painted with blending. Useful if you
+# have a glx-fshader-win that could turn opaque pixels transparent.
+#
+# force-win-blend = false
+
+# Do not use EWMH to detect fullscreen windows.
+# Reverts to checking if a window is fullscreen based only on its size and coordinates.
+#
+# no-ewmh-fullscreen = false
+
+# Dimming bright windows so their brightness doesn't exceed this set value.
+# Brightness of a window is estimated by averaging all pixels in the window,
+# so this could comes with a performance hit.
+# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
+#
+# max-brightness = 1.0
+
+# Make transparent windows clip other windows like non-transparent windows do,
+# instead of blending on top of them.
+#
+# transparent-clipping = false
+
+# Specify a list of conditions of windows that should never have transparent
+# clipping applied. Useful for screenshot tools, where you need to be able to
+# see through transparent parts of the window.
+#
+# transparent-clipping-exclude = []
+
+# Set the log level. Possible values are:
+#  "trace", "debug", "info", "warn", "error"
+# in increasing level of importance. Case doesn't matter.
+# If using the "TRACE" log level, it's better to log into a file
+# using *--log-file*, since it can generate a huge stream of logs.
+#
+# log-level = "debug"
+log-level = "warn";
+
+# Set the log file.
+# If *--log-file* is never specified, logs will be written to stderr.
+# Otherwise, logs will to written to the given file, though some of the early
+# logs might still be written to the stderr.
+# When setting this option from the config file, it is recommended to use an absolute path.
+#
+# log-file = "/path/to/your/log/file"
+
+# Show all X errors (for debugging)
+# show-all-xerrors = false
+
+# Write process ID to a file.
+# write-pid-path = "/path/to/your/log/file"
+
+# Window type settings
+#
+# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard:
+#     "unknown", "desktop", "dock", "toolbar", "menu", "utility",
+#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu",
+#     "tooltip", "notification", "combo", and "dnd".
+#
+# Following per window-type options are available: ::
+#
+#   fade, shadow:::
+#     Controls window-type-specific shadow and fade settings.
+#
+#   opacity:::
+#     Controls default opacity of the window type.
+#
+#   focus:::
+#     Controls whether the window of this type is to be always considered focused.
+#     (By default, all window types except "normal" and "dialog" has this on.)
+#
+#   full-shadow:::
+#     Controls whether shadow is drawn under the parts of the window that you
+#     normally won't be able to see. Useful when the window has parts of it
+#     transparent, and you want shadows in those areas.
+#
+#   clip-shadow-above:::
+#     Controls wether shadows that would have been drawn above the window should
+#     be clipped. Useful for dock windows that should have no shadow painted on top.
+#
+#   redir-ignore:::
+#     Controls whether this type of windows should cause screen to become
+#     redirected again after been unredirected. If you have unredir-if-possible
+#     set, and doesn't want certain window to cause unnecessary screen redirection,
+#     you can set this to `true`.
+#
+wintypes:
+{
+  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
+  dock = { shadow = false; clip-shadow-above = true; }
+  dnd = { shadow = false; }
+  popup_menu = { opacity = 0.8; }
+  dropdown_menu = { opacity = 0.8; }
+};
--- a/config/gtk-3.0/colors.css
+++ b/config/gtk-3.0/colors.css
@ -0,0 +1,84 @@
+@define-color borders_breeze #494d61;
+@define-color content_view_bg_breeze #24273a;
+@define-color error_color_backdrop_breeze #826a90;
+@define-color error_color_breeze #ed8796;
+@define-color error_color_insensitive_backdrop_breeze #b16a7a;
+@define-color error_color_insensitive_breeze #b16a7a;
+@define-color insensitive_base_color_breeze #24273a;
+@define-color insensitive_base_fg_color_breeze #989fbd;
+@define-color insensitive_bg_color_breeze #202233;
+@define-color insensitive_borders_breeze #3e4155;
+@define-color insensitive_fg_color_breeze #989fbd;
+@define-color insensitive_selected_bg_color_breeze #202233;
+@define-color insensitive_selected_fg_color_breeze #989fbd;
+@define-color insensitive_unfocused_bg_color_breeze #202233;
+@define-color insensitive_unfocused_fg_color_breeze #989fbd;
+@define-color insensitive_unfocused_selected_bg_color_breeze #202233;
+@define-color insensitive_unfocused_selected_fg_color_breeze #989fbd;
+@define-color link_color_breeze #926ee4;
+@define-color link_visited_color_breeze #c6a0f6;
+@define-color success_color_backdrop_breeze #728599;
+@define-color success_color_breeze #a6da95;
+@define-color success_color_insensitive_backdrop_breeze #7fa47a;
+@define-color success_color_insensitive_breeze #7fa47a;
+@define-color theme_base_color_breeze #24273a;
+@define-color theme_bg_color_breeze #1e2030;
+@define-color theme_button_background_backdrop_breeze #26293e;
+@define-color theme_button_background_backdrop_insensitive_breeze #313449;
+@define-color theme_button_background_insensitive_breeze #313449;
+@define-color theme_button_background_normal_breeze #363a4f;
+@define-color theme_button_decoration_focus_backdrop_breeze #605c8a;
+@define-color theme_button_decoration_focus_backdrop_insensitive_breeze #7159b1;
+@define-color theme_button_decoration_focus_breeze #926ee4;
+@define-color theme_button_decoration_focus_insensitive_breeze #7159b1;
+@define-color theme_button_decoration_hover_backdrop_breeze #605c8a;
+@define-color theme_button_decoration_hover_backdrop_insensitive_breeze #7159b1;
+@define-color theme_button_decoration_hover_breeze #926ee4;
+@define-color theme_button_decoration_hover_insensitive_breeze #7159b1;
+@define-color theme_button_foreground_active_backdrop_breeze #7f84a2;
+@define-color theme_button_foreground_active_backdrop_insensitive_breeze #989fbd;
+@define-color theme_button_foreground_active_breeze #ffffff;
+@define-color theme_button_foreground_active_insensitive_breeze #989fbd;
+@define-color theme_button_foreground_backdrop_breeze #7f84a2;
+@define-color theme_button_foreground_backdrop_insensitive_breeze #989fbd;
+@define-color theme_button_foreground_insensitive_breeze #989fbd;
+@define-color theme_button_foreground_normal_breeze #cad3f5;
+@define-color theme_fg_color_breeze #cad3f5;
+@define-color theme_header_background_backdrop_breeze #24273a;
+@define-color theme_header_background_breeze #1e2030;
+@define-color theme_header_background_light_breeze #1e2030;
+@define-color theme_header_foreground_backdrop_breeze #7f84a2;
+@define-color theme_header_foreground_breeze #cad3f5;
+@define-color theme_header_foreground_insensitive_backdrop_breeze #7f84a2;
+@define-color theme_header_foreground_insensitive_breeze #7f84a2;
+@define-color theme_hovering_selected_bg_color_breeze #926ee4;
+@define-color theme_selected_bg_color_breeze #7158b1;
+@define-color theme_selected_fg_color_breeze #ffffff;
+@define-color theme_text_color_breeze #cad3f5;
+@define-color theme_titlebar_background_backdrop_breeze #24273a;
+@define-color theme_titlebar_background_breeze #1e2030;
+@define-color theme_titlebar_background_light_breeze #1e2030;
+@define-color theme_titlebar_foreground_backdrop_breeze #7f84a2;
+@define-color theme_titlebar_foreground_breeze #cad3f5;
+@define-color theme_titlebar_foreground_insensitive_backdrop_breeze #7f84a2;
+@define-color theme_titlebar_foreground_insensitive_breeze #7f84a2;
+@define-color theme_unfocused_base_color_breeze #24273a;
+@define-color theme_unfocused_bg_color_breeze #24273a;
+@define-color theme_unfocused_fg_color_breeze #7f84a2;
+@define-color theme_unfocused_selected_bg_color_alt_breeze #24273a;
+@define-color theme_unfocused_selected_bg_color_breeze #24273a;
+@define-color theme_unfocused_selected_fg_color_breeze #7f84a2;
+@define-color theme_unfocused_text_color_breeze #7f84a2;
+@define-color theme_unfocused_view_bg_color_breeze #24273a;
+@define-color theme_unfocused_view_text_color_breeze #989fbd;
+@define-color theme_view_active_decoration_color_breeze #926ee4;
+@define-color theme_view_hover_decoration_color_breeze #926ee4;
+@define-color tooltip_background_breeze #24273a;
+@define-color tooltip_border_breeze #4e5269;
+@define-color tooltip_text_breeze #cad3f5;
+@define-color unfocused_borders_breeze #3b3e54;
+@define-color unfocused_insensitive_borders_breeze #3e4155;
+@define-color warning_color_backdrop_breeze #86868d;
+@define-color warning_color_breeze #eed49f;
+@define-color warning_color_insensitive_backdrop_breeze #b1a081;
+@define-color warning_color_insensitive_breeze #b1a081;
--- a/config/gtk-3.0/gtk.css
+++ b/config/gtk-3.0/gtk.css
@ -0,0 +1,4 @@
+VteTerminal, vte-terminal {
+    padding: 13px;
+}
+@import 'colors.css';
--- a/config/gtk-3.0/settings.ini
+++ b/config/gtk-3.0/settings.ini
@ -0,0 +1,22 @@
+[Settings]
+gtk-application-prefer-dark-theme=true
+gtk-button-images=true
+gtk-cursor-theme-name=breeze_cursors
+gtk-cursor-theme-size=24
+gtk-decoration-layout=icon:minimize,maximize,close
+gtk-enable-animations=true
+gtk-enable-event-sounds=0
+gtk-enable-input-feedback-sounds=0
+gtk-font-name=Noto Sans,  10
+gtk-icon-theme-name=breeze
+gtk-menu-images=true
+gtk-modules=colorreload-gtk-module
+gtk-primary-button-warps-slider=false
+gtk-theme-name=Arc-Darker
+gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
+gtk-toolbar-style=3
+gtk-xft-antialias=1
+gtk-xft-dpi=98304
+gtk-xft-hinting=1
+gtk-xft-hintstyle=hintfull
+gtk-xft-rgba=none
--- a/config/i3/config
+++ b/config/i3/config
@ -0,0 +1,574 @@
+# This file is a modified version based on default i3-config-wizard config
+# source is available here:
+# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/master/.config/i3/config
+# Maintainer: joekamprad [joekamprad@endeavouros.com]
+# https://endeavouros.com
+#
+# iconic font icon search: https://fontawesome.com/v4.7/cheatsheet/
+#
+# --> to update this run the following command (will backup existing setup file)
+# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/config -P ~/.config/i3/
+#
+# Endeavouros-i3 config file
+# Source for complete framework of our i3 config and theming here: https://github.com/endeavouros-team/endeavouros-i3wm-setup
+# EndeavourOS wiki holds some Information also: https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
+# Please see http://i3wm.org/docs/userguide.html for the official i3 reference!
+
+#######################
+# config starts here: #
+#######################
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango: Noto Sans Regular 10
+
+# set the mod key to the winkey:
+set $mod Mod4
+
+#####################
+# workspace layout: #
+#####################
+
+# default i3 tiling mode:
+workspace_layout default
+
+# i3 stacking layout:
+# Each window will be fullscreen and tabbed top to bottom.
+#workspace_layout stacking
+
+# i3 tabbed layout:
+# Each new window will open fullscreen as a tab (left to right)
+#workspace_layout tabbed
+
+##############################
+# extra options for windows: #
+##############################
+
+#border indicator on windows:
+new_window pixel 1
+
+# thin borders
+# hide_edge_borders both
+
+# Set inner/outer gaps
+gaps inner 6
+gaps outer 3
+
+# show window title bars (not officially supported with i3gaps)
+#default_border normal
+
+# window title alignment
+#title_align center
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# switch/iterate between workspaces
+bindsym $mod+Tab workspace next
+bindsym $mod+Shift+Tab workspace prev
+
+# switch to workspace
+bindsym $mod+1    workspace  $ws1
+bindsym $mod+2    workspace  $ws2
+bindsym $mod+3    workspace  $ws3
+bindsym $mod+4    workspace  $ws4
+bindsym $mod+5    workspace  $ws5
+bindsym $mod+6    workspace  $ws6
+bindsym $mod+7    workspace  $ws7
+bindsym $mod+8    workspace  $ws8
+bindsym $mod+9    workspace  $ws9
+bindsym $mod+0    workspace  $ws10
+
+# switch to workspace with numpad keys
+bindcode $mod+87 workspace 1
+bindcode $mod+88 workspace 2
+bindcode $mod+89 workspace 3
+bindcode $mod+83 workspace 4
+bindcode $mod+84 workspace 5
+bindcode $mod+85 workspace 6
+bindcode $mod+79 workspace 7
+bindcode $mod+80 workspace 8
+bindcode $mod+81 workspace 9
+bindcode $mod+90 workspace 10
+
+# switch to workspace with numlock numpad keys
+bindcode $mod+Mod2+87 workspace $ws1
+bindcode $mod+Mod2+88 workspace $ws2
+bindcode $mod+Mod2+89 workspace $ws3
+bindcode $mod+Mod2+83 workspace $ws4
+bindcode $mod+Mod2+84 workspace $ws5
+bindcode $mod+Mod2+85 workspace $ws6
+bindcode $mod+Mod2+79 workspace $ws7
+bindcode $mod+Mod2+80 workspace $ws8
+bindcode $mod+Mod2+81 workspace $ws9
+bindcode $mod+Mod2+90 workspace $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1    move container to workspace  $ws1
+bindsym $mod+Shift+2    move container to workspace  $ws2
+bindsym $mod+Shift+3    move container to workspace  $ws3
+bindsym $mod+Shift+4    move container to workspace  $ws4
+bindsym $mod+Shift+5    move container to workspace  $ws5
+bindsym $mod+Shift+6    move container to workspace  $ws6
+bindsym $mod+Shift+7    move container to workspace  $ws7
+bindsym $mod+Shift+8    move container to workspace  $ws8
+bindsym $mod+Shift+9    move container to workspace  $ws9
+bindsym $mod+Shift+0    move container to workspace  $ws10
+
+# move focused container to workspace with numpad keys
+bindcode $mod+Shift+Mod2+87 	move container to workspace  $ws1
+bindcode $mod+Shift+Mod2+88 	move container to workspace  $ws2
+bindcode $mod+Shift+Mod2+89 	move container to workspace  $ws3
+bindcode $mod+Shift+Mod2+83 	move container to workspace  $ws4
+bindcode $mod+Shift+Mod2+84 	move container to workspace  $ws5
+bindcode $mod+Shift+Mod2+85 	move container to workspace  $ws6
+bindcode $mod+Shift+Mod2+79 	move container to workspace  $ws7
+bindcode $mod+Shift+Mod2+80 	move container to workspace  $ws8
+bindcode $mod+Shift+Mod2+81 	move container to workspace  $ws9
+bindcode $mod+Shift+Mod2+90 	move container to workspace  $ws10
+
+# move focused container to workspace with numpad keys
+bindcode $mod+Shift+87 	 move container to workspace  $ws1
+bindcode $mod+Shift+88 	 move container to workspace  $ws2
+bindcode $mod+Shift+89 	 move container to workspace  $ws3
+bindcode $mod+Shift+83 	 move container to workspace  $ws4
+bindcode $mod+Shift+84 	 move container to workspace  $ws5
+bindcode $mod+Shift+85 	 move container to workspace  $ws6
+bindcode $mod+Shift+79 	 move container to workspace  $ws7
+bindcode $mod+Shift+80 	 move container to workspace  $ws8
+bindcode $mod+Shift+81 	 move container to workspace  $ws9
+bindcode $mod+Shift+90 	 move container to workspace  $ws10
+
+# resize window (you can also use the mouse for that):
+#mode "resize" {
+# These bindings trigger as soon as you enter the resize mode
+# Pressing left will shrink the window's width.
+# Pressing right will grow the window's width.
+# Pressing up will shrink the window's height.
+# Pressing down will grow the window's height.
+#        bindsym j resize shrink width 10 px or 10 ppt
+#        bindsym k resize grow height 10 px or 10 ppt
+#        bindsym l resize shrink height 10 px or 10 ppt
+#        bindsym ntilde resize grow width 10 px or 10 ppt
+
+# same bindings, but for the arrow keys
+#	bindsym Left resize shrink width 10 px or 10 ppt
+#        bindsym Down resize grow height 10 px or 10 ppt
+#        bindsym Up resize shrink height 10 px or 10 ppt
+#        bindsym Right resize grow width 10 px or 10 ppt
+
+# back to normal: Enter or Escape
+#	bindsym Return mode "default"
+#        bindsym Escape mode "default"
+#}
+
+#bindsym $mod+r mode "resize"
+
+######################################
+# keybindings for different actions: #
+######################################
+
+# start a terminal
+bindsym $mod+Return exec wezterm
+
+# kill focused window
+bindsym $mod+q kill
+
+# exit-menu
+bindsym $mod+Shift+e exec ~/.config/i3/scripts/powermenu
+
+# Lock the system
+# lock with a picture:
+#bindsym $mod+l exec i3lock -i  ~/.config/i3/i3-lock-screen.png -p default|win -t
+# lock by blurring the screen:
+bindsym $mod+l exec ~/.config/i3/scripts/blur-lock
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+
+# restart i3 inplace (preserves your layout/session, can be used to update i3)
+bindsym $mod+Shift+r restart
+
+# keybinding in fancy rofi (automated):
+bindsym F1 exec ~/.config/i3/scripts/keyhint-2
+# alternative
+# keybinding list in editor:
+# bindsym $mod+F1 exec xed ~/.config/i3/keybindings
+
+# Backlight control
+bindsym XF86MonBrightnessUp exec xbacklight +10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
+bindsym XF86MonBrightnessDown exec xbacklight -10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+b focus up
+bindsym $mod+o focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+b move up
+bindsym $mod+Shift+o move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+g layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# open new empty workspace
+bindsym $mod+Shift+n exec ~/.config/i3/scripts/empty_workspace
+
+# Multimedia Keys
+
+# volume
+bindsym XF86AudioRaiseVolume exec amixer -D pulse sset Master 5%+ && pkill -RTMIN+1 i3blocks
+bindsym XF86AudioLowerVolume exec amixer -D pulse sset Master 5%- && pkill -RTMIN+1 i3blocks
+
+# gradular volume control
+bindsym $mod+XF86AudioRaiseVolume exec amixer -D pulse sset Master 1%+ && pkill -RTMIN+1 i3blocks
+bindsym $mod+XF86AudioLowerVolume exec amixer -D pulse sset Master 1%- && pkill -RTMIN+1 i3blocks
+
+# mute
+bindsym XF86AudioMute exec amixer sset Master toggle && killall -USR1 i3blocks
+
+# audio control
+bindsym XF86AudioPlay exec playerctl play
+bindsym XF86AudioPause exec playerctl pause
+bindsym XF86AudioNext exec playerctl next
+bindsym XF86AudioPrev exec playerctl previous
+
+# Redirect sound to headphones
+bindsym $mod+p exec /usr/local/bin/switch-audio-port
+
+## App shortcuts
+bindsym $mod+w exec /usr/bin/firefox
+bindsym $mod+n exec /usr/bin/thunar
+bindsym Print exec scrot ~/%Y-%m-%d-%T-screenshot.png && notify-send "Screenshot saved to ~/$(date +"%Y-%m-%d-%T")-screenshot.png"
+
+# Power Profiles menu switcher (rofi)
+bindsym $mod+Shift+p exec ~/.config/i3/scripts/power-profiles
+
+##########################################
+# configuration for workspace behaviour: #
+##########################################
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1:"
+set $ws2 "2:"
+set $ws3 "3:"
+set $ws4 "4:"
+set $ws5 "5:"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# use workspaces on different displays:
+# where you have to replace VGA-0/HDMI-0 with the names for your displays
+# you can get from xrandr command
+#workspace $ws1 output VGA-0
+#workspace $ws2 output VGA-0
+#workspace $ws3 output HDMI-0
+#workspace $ws4 output HDMI-0
+#workspace $ws5 output HDMI-0
+
+# bind program to workspace and focus to them on startup:
+assign [class="Xfce4-terminal"] $ws1
+assign [class="(?i)firefox"] $ws2
+assign [class="Thunar"] $ws3
+assign [class="thunderbird"] $ws4
+assign [class="TelegramDesktop"] $ws5
+
+# automatic set focus new window if it opens on another workspace than the current:
+for_window [class=Xfce4-terminal] focus
+for_window [class=(?i)firefox] focus
+for_window [class=Thunar] focus
+for_window [class=Thunderbird] focus
+for_window [class=TelegramDesktop] focus
+
+##############
+# compositor #
+##############
+
+# transparency
+# uncomment one of them to be used
+# options could need changes, related to used GPU and drivers.
+# to find the right setting consult the archwiki or ask at the forum.
+#
+# xcompmgr: https://wiki.archlinux.org/title/Xcompmgr
+# manpage: https://man.archlinux.org/man/xcompmgr.1.en
+# install xcompmgr package to use it (yay -S xcompmgr)
+#exec --no-startup-id xcompmgr -C -n &
+# or an more specialized config like this:
+#exec --no-startup-id xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 &
+#
+# or:
+#
+# picom: https://wiki.archlinux.org/title/Picom
+# manpage: https://man.archlinux.org/man/picom.1.en
+# The default configuration is available in /etc/xdg/picom.conf 
+# For modifications, it can be copied to ~/.config/picom/picom.conf or ~/.config/picom.conf
+# install picom package (yay -S picom)
+# start using default config 
+#exec_always --no-startup-id picom -b
+#
+# for custom config:
+#exec_always --no-startup-id picom --config  ~/.config/picom.conf
+
+#############################################
+# autostart applications/services on login: #
+#############################################
+
+#get auth work with polkit-gnome
+exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
+# dex execute .desktop files + apps using /etc/xdg/autostart.
+# when second to i3 a DE is installed or mixed usage of i3 + xfce4 or GNOME
+# in this cases better disable dex and use manual starting apps using xdg/autostart
+# if enabled you should comment welcome app.
+# https://github.com/jceb/dex
+#exec --no-startup-id dex -a -s /etc/xdg/autostart/:~/.config/autostart/
+exec --no-startup-id dex --autostart --environment i3
+
+# start welcome app
+#exec --no-startup-id sh /usr/share/endeavouros/scripts/welcome --startdelay=3 
+
+# num lock activated
+#exec --no-startup-id numlockx on
+
+# configure multiple keyboard layouts and hotkey to switch (Alt+CAPSLOCK in this example)
+#exec --no-startup-id setxkbmap -layout 'us,sk' -variant altgr-intl,qwerty -option 'grp:alt_caps_toggle'
+
+# start conky:
+#exec_always --no-startup-id conky
+
+# start a script to setup displays
+# uncomment the next line, use arandr to setup displays and save the file as monitor:
+exec --no-startup-id ~/.screenlayout/monitor.sh
+
+# set wallpaper
+# exec --no-startup-id sleep 2 && nitrogen --restore
+exec --no-startup-id sleep 1 && feh --bg-fill /usr/share/endeavouros/backgrounds/endeavouros-wallpaper.png
+
+# set powersavings for display:
+exec --no-startup-id xset s 480 dpms 600 600 600
+
+# disable power saving (for example if using xscreensaver)
+#exec --no-startup-id xset -dpms
+
+# use xautolock to use autosuspend rules for mobile devices
+# https://wiki.archlinux.org/title/Session_lock#xautolock
+#exec --no-startup-id xautolock -time 60 -locker "systemctl suspend"
+
+
+# xscreensaver
+# https://www.jwz.org/xscreensaver
+#exec --no-startup-id xscreensaver --no-splash
+
+# Desktop notifications
+exec --no-startup-id dbus-launch dunst --config ~/.config/dunst/dunstrc
+# alternative if you installed aside with XFCE4:
+# exec --no-startup-id /usr/lib/xfce4/notifyd/xfce4-notifyd &
+
+# autotiling script
+# https://github.com/nwg-piotr/autotiling
+# `yay -S autotiling ;) (it is in AUR)
+#exec_always --no-startup-id autotiling
+
+# Autostart apps as you like
+#exec --no-startup-id sleep 2 && xfce4-terminal
+exec --no-startup-id sleep 7 && firefox https://github.com/endeavouros-team/endeavouros-i3wm-setup/blob/main/force-knowledge.md
+#exec --no-startup-id sleep 3 && thunar
+
+###############
+# system tray #
+###############
+# if you do not use dex: exec --no-startup-id dex --autostart --environment i3
+# you need to have tray apps started manually one by one:
+
+# start blueberry app for managing bluetooth devices from tray:
+#exec --no-startup-id blueberry-tray
+
+# networkmanager-applet
+#exec --no-startup-id nm-applet
+
+# clipman-applet
+#exec --no-startup-id xfce4-clipman
+
+##################
+# floating rules #
+##################
+
+# set floating (nontiling) for apps needing it
+for_window [class="Yad" instance="yad"] floating enable
+for_window [class="Galculator" instance="galculator"] floating enable
+for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
+
+# set floating (nontiling) for special apps
+for_window [class="Xsane" instance="xsane"] floating enable
+for_window [class="Pavucontrol" instance="pavucontrol"] floating enable
+for_window [class="qt5ct" instance="qt5ct"] floating enable
+for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
+for_window [class="Bluetooth-sendto" instance="bluetooth-sendto"] floating enable
+for_window [class="Pamac-manager"] floating enable
+for_window [window_role="About"] floating enable
+
+# set border of floating window
+for_window [class="urxvt"] border pixel 1
+
+# set size of floating window
+#for_window [window_role="(?i)GtkFileChooserDialog"] resize set 640 480 #to set size of file choose dialog
+#for_window [class=".*"] resize set 640 480 #to change size of all floating windows 
+
+# set position of floating window
+#for_window [class=".*"] move position center
+
+######################################
+# color settings for bar and windows #
+######################################
+
+# Define colors variables:
+set $darkbluetrans	#08052be6
+set $darkblue		#08052b
+set $lightblue		#5294e2
+set $urgentred		#e53935
+set $white		#ffffff
+set $black		#000000
+set $purple		#e345ff
+set $darkgrey		#383c4a
+set $grey		#b0b5bd
+set $mediumgrey		#8b8b8b
+set $yellowbrown	#e1b700
+
+# define colors for windows:
+#class		        	border		bground		text		indicator	child_border
+client.focused		    	$lightblue	$darkblue	$white		$mediumgrey	$mediumgrey
+client.unfocused	    	$darkblue	$darkblue	$grey		$darkgrey	$darkgrey
+client.focused_inactive		$darkblue	$darkblue	$grey		$black		$black
+client.urgent		    	$urgentred	$urgentred	$white		$yellowbrown	$yellowbrown
+
+############################################
+# bar settings (input comes from i3blocks) #
+############################################
+
+# Start i3bar to display a workspace bar
+# (plus the system information i3status finds out, if available)
+bar {
+		font pango: Noto Sans Regular 10
+		status_command i3blocks -c ~/.config/i3/i3blocks.conf
+	    	position bottom
+#	    	i3bar_command i3bar --transparency
+# it could be that you have no primary display set: set one (xrandr --output <output> --primary)
+# reference: https://i3wm.org/docs/userguide.html#_tray_output
+		    #tray_output primary
+		    tray_padding 0
+
+# When strip_workspace_numbers is set to yes,
+# any workspace that has a name of the form
+# “[n][:][NAME]” will display only the name.
+strip_workspace_numbers yes
+##strip_workspace_name no
+
+		    colors {
+		    separator          $purple
+		    background         $darkgrey
+		    statusline         $white
+#                          		border 		        bg		txt		indicator
+		focused_workspace	$mediumgrey	   	$grey		$darkgrey	$purple
+		active_workspace	$lightblue      	$mediumgrey	$darkgrey	$purple
+		inactive_workspace	$darkgrey   		$darkgrey	$grey		$purple
+		urgent_workspace	$urgentred	    	$urgentred	$white		$purple
+	}
+}
+
+# you can add different bars for multidisplay setups on each display:
+# set output HDMI-0 to the display you want the bar, --transparency can be set.
+# Transparency needs rgba color codes to be used where the last two letters are the transparency factor see here:
+# https://gist.github.com/lopspower/03fb1cc0ac9f32ef38f4
+# #08052be6 --> e6=90%
+
+# bar {
+#	font pango: Noto Sans Regular 10
+#	status_command i3blocks -c ~/.config/i3/i3blocks-2.conf
+#	i3bar_command i3bar --transparency
+#	output HDMI-0
+#	position bottom
+#
+# When strip_workspace_numbers is set to yes,
+# any workspace that has a name of the form
+# “[n][:][NAME]” will display only the name.
+#strip_workspace_numbers yes
+##strip_workspace_name no
+#
+#	colors {
+#		separator          $purple
+#		background         $darkbluetrans
+#        	statusline         $white
+#					border		bg		txt		indicator
+#		focused_workspace	$lighterblue	$lighterblue	$darkblue	$purple
+#		active_workspace	$lightdblue	$lightdblue	$darkblue	$purple
+#		inactive_workspace	$darkblue	$darkblue	$lightdblue	$purple
+#		urgent_workspace	$urgentred	$urgentred	$white		$purple
+#	}
+#}
+
+#####################################
+# Application menu handled by rofi: #
+#####################################
+
+## rofi bindings fancy application menu ($mod+d /F9 optional disabled)
+
+bindsym $mod+d exec rofi -modi drun -show drun \
+		-config ~/.config/rofi/rofidmenu.rasi
+
+#bindsym F9 exec rofi -modi drun -show drun \
+#		-config ~/.config/rofi/rofidmenu.rasi
+
+## rofi bindings for window menu ($mod+t /F10 optional disabled)
+
+bindsym $mod+t exec rofi -show window \
+		-config ~/.config/rofi/rofidmenu.rasi
+
+#bindsym F10 exec rofi -show window \
+#		-config ~/.config/rofi/rofidmenu.rasi
+
+## rofi bindings to manage clipboard (install rofi-greenclip from the AUR)
+
+#exec --no-startup-id greenclip daemon>/dev/null
+#bindsym $mod+c exec --no-startup-id rofi -modi "clipboard:greenclip print" -show clipboard \
+#		-config ~/.config/rofi/rofidmenu.rasi
--- a/config/i3/i3blocks.conf
+++ b/config/i3/i3blocks.conf
@ -0,0 +1,179 @@
+# i3blocks config file changed for EndeavourOS-i3 setup
+
+# source is available here:
+# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf
+# Maintainer: joekamprad [joekamprad@endeavouros.com]
+# Former Visual Designer: Florent Valetti [@FLVAL EndeavourOS]
+# created for i3wm setup on EndeavourOS
+# https://endeavouros.com
+
+# cheatsheet for icon fonts used on the block-bar:
+# https://fontawesome.com/v4.7/cheatsheet/
+
+# --> to update this run the following command:
+# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf -P ~/.config/i3/
+
+# Please see man i3blocks for a complete reference!
+# The man page is also hosted at http://vivien.github.io/i3blocks
+
+
+# List of valid properties:
+#
+# align
+# color
+# command
+# full_text
+# instance
+# interval
+# label
+# min_width
+# name
+# separator
+# separator_block_width
+# short_text
+# signal
+# urgent
+
+# Global properties
+#
+# The top properties below are applied to every block, but can be overridden.
+separator=false
+markup=pango
+
+#[Weather]
+#command=~/.config/i3/scripts/openweather
+# or:
+#command=~/.config/i3/scripts/openweather-city
+#interval=1800
+#color=#7275b3
+
+[terminal]
+full_text= 
+color=#807dfe
+command=i3-msg -q exec xfce4-terminal
+
+[browser]
+full_text= 
+color=#ff7f81
+command=i3-msg -q exec firefox
+
+[files]
+full_text= 
+color=#7f3fbf
+command=i3-msg -q exec thunar ~/
+
+#[mail]
+#full_text= 
+#color=#dbcb75
+#command=i3-msg -q exec thunderbird
+
+[simple-2]
+full_text=: :
+color=#717171
+
+# Disk usage
+#
+# The directory defaults to $HOME if the instance is not specified.
+# The script may be called with a optional argument to set the alert
+# (defaults to 10 for 10%).
+[disk]
+label=
+instance=/
+command=~/.config/i3/scripts/disk
+interval=30
+
+# Memory usage
+#
+# The type defaults to "mem" if the instance is not specified.
+[memory]
+label=
+command=~/.config/i3/scripts/memory
+interval=2
+
+[cpu_usage]
+label=
+command=~/.config/i3/scripts/cpu_usage
+#min_width=CPU: 100.00%
+interval=2
+
+[CPU-temperature]
+label=
+command=~/.config/i3/scripts/temperature
+interval=30
+#T_WARN=70
+#T_CRIT=90
+#SENSOR_CHIP=""
+# where SENSOR_CHIP can be find with sensors output
+# can be used also for GPU temperature or other temperature sensors lm-sensors detects.
+
+# showing name of connected network (enable for wifi use)
+#[net]
+#label=
+#command=echo "$(LANG=C nmcli d | grep connected  | awk '{print $4}')"
+#interval=30
+
+[bandwidth]
+command=~/.config/i3/scripts/bandwidth2
+interval=persist
+
+# Battery indicator
+[battery]
+command=~/.config/i3/scripts/battery2
+# for alternative battery script  change to battery1
+# change this to battery-pinebook-pro if you are running on pinebook-pro
+label=
+interval=30
+
+[simple-2]
+full_text=: :
+color=#717171
+
+[pavucontrol]
+full_text=
+command=pavucontrol
+
+[volume-pulseaudio]
+command=~/.config/i3/scripts/volume
+instance=Master
+interval=1
+
+# display keyboard layout name
+# for keyboard layouts switcher
+# see i3 config file
+# this needs xkblayout-state installed from the AUR:
+# https://aur.archlinux.org/packages/xkblayout-state-git
+#[keyboard-layout]
+#command=~/.config/i3/scripts/keyboard-layout
+#interval=2
+
+[keybindings]
+full_text=
+command=~/.config/i3/scripts/keyhint
+
+# power-profiles-daemon implementation:
+# needs package power-profiles-daemon installed and the service running see here:
+# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
+
+#set power-profile
+[ppd_menu]
+full_text=
+command=~/.config/i3/scripts/power-profiles
+color=#407437
+
+#Show the current power-profile
+[ppd-status]
+command=~/.config/i3/scripts/ppd-status
+interval=5
+
+[time]
+#label=
+command=date '+%a %d %b %H:%M:%S'
+interval=1
+
+[shutdown_menu]
+full_text=
+command=~/.config/i3/scripts/powermenu
+
+[simple-2]
+full_text=: :
+color=#717171
--- a/config/i3/keybindings
+++ b/config/i3/keybindings
@ -0,0 +1,106 @@
+EndeavourOS i3wm Keybindings cheat sheet:
+
+--> to update this run the following command:
+wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/keybindings -P ~/.config/i3/
+
+All sources and updates are available at GitHub:
+https://github.com/endeavouros-team/endeavouros-i3wm-setup
+
+For reference consult our WIKI:
+https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
+
+ = windows key
+
+# start xfce4-terminal
++Return 
+
+# kill focused window
++q
+
+# Application menu search by typing (fancy Rofi menu):
++d
+
+# Window switcher menu (fancy Rofi menu):
++t
+
+# fancy exit-menu on bottom right:
++Shift+e
+
+# Lock the system
+# lock with a picture or blurring the screen (options in config)
++l
+
+# reload the configuration file
++Shift+c
+
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
++Shift+r
+
+# keybinding in fancy rofi (automated)
+F1
+
+# full keybinding list in editor:
++F1
+
+# change window focus
++j focus left
++k focus down
++b focus up
++o focus right
+
+# alternatively, you can use the cursor keys:
++Left focus left
++Down focus down
++Up focus up
++Right focus right
+
+# move a focused window
++Shift+j move left
++Shift+k move down
++Shift+b move up
++Shift+o move right
+
+# alternatively, you can use the cursor keys:
++Shift+Left move left
++Shift+Down move down
++Shift+Up move up
++Shift+Right move right
+
+# split in horizontal orientation
++h split h
+
+# split in vertical orientation
++v split v
+
+# enter fullscreen mode for the focused container
++f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
++s layout stacking
++g layout tabbed
++e layout toggle split
+
+# toggle tiling / floating
++Shift+space floating toggle
+
+# change focus between tiling / floating windows
++space focus mode_toggle
+
+# focus the parent container
++a focus parent
+
+# focus the child container
+#+d focus child
+
+# resize floating window
++right mouse button
+
+## Multimedia Keys
+
+# Redirect sound to headphones
++p
+
+## App shortcuts
++w starts Firefox
++n starts Thunar
+ Button screenshot
--- a/config/i3/scripts/bandwidth2
+++ b/config/i3/scripts/bandwidth2
@ -0,0 +1,104 @@
+#!/usr/bin/env bash
+#
+# Copyright (C) 2015 James Murphy
+# Licensed under the terms of the GNU GPL v2 only.
+#
+# i3blocks blocklet script to monitor bandwidth usage
+
+iface="${BLOCK_INSTANCE}"
+iface="${IFACE:-$iface}"
+dt="${DT:-3}"
+unit="${UNIT:-MB}"
+LABEL="${LABEL:-<span font='FontAwesome'> </span>}" # down arrow up arrow
+printf_command="${PRINTF_COMMAND:-"printf \"${LABEL}%1.0f/%1.0f %s/s\\n\", rx, wx, unit;"}"
+
+function default_interface {
+    ip route | awk '/^default via/ {print $5; exit}'
+}
+
+function check_proc_net_dev {
+    if [ ! -f "/proc/net/dev" ]; then
+        echo "/proc/net/dev not found"
+        exit 1
+    fi
+}
+
+function list_interfaces {
+    check_proc_net_dev
+    echo "Interfaces in /proc/net/dev:"
+    grep -o "^[^:]\\+:" /proc/net/dev | tr -d " :"
+}
+
+while getopts i:t:u:p:lh opt; do
+    case "$opt" in
+        i) iface="$OPTARG" ;;
+        t) dt="$OPTARG" ;;
+        u) unit="$OPTARG" ;;
+        p) printf_command="$OPTARG" ;;
+        l) list_interfaces && exit 0 ;;
+        h) printf \
+"Usage: bandwidth3 [-i interface] [-t time] [-u unit] [-p printf_command] [-l] [-h]
+Options:
+-i\tNetwork interface to measure. Default determined using \`ip route\`.
+-t\tTime interval in seconds between measurements. Default: 3
+-u\tUnits to measure bytes in. Default: Mb
+\tAllowed units: Kb, KB, Mb, MB, Gb, GB, Tb, TB
+\tUnits may have optional it/its/yte/ytes on the end, e.g. Mbits, KByte
+-p\tAwk command to be called after a measurement is made. 
+\tDefault: printf \"<span font='FontAwesome'>  </span>%%-5.1f/%%5.1f %%s/s\\\\n\", rx, wx, unit;
+\tExposed variables: rx, wx, tx, unit, iface
+-l\tList available interfaces in /proc/net/dev
+-h\tShow this help text
+" && exit 0;;
+    esac
+done
+
+check_proc_net_dev
+
+iface="${iface:-$(default_interface)}"
+while [ -z "$iface" ]; do
+    echo No default interface
+    sleep "$dt"
+    iface=$(default_interface)
+done
+
+case "$unit" in
+    Kb|Kbit|Kbits)   bytes_per_unit=$((1024 / 8));;
+    KB|KByte|KBytes) bytes_per_unit=$((1024));;
+    Mb|Mbit|Mbits)   bytes_per_unit=$((1024 * 1024 / 8));;
+    MB|MByte|MBytes) bytes_per_unit=$((1024 * 1024));;
+    Gb|Gbit|Gbits)   bytes_per_unit=$((1024 * 1024 * 1024 / 8));;
+    GB|GByte|GBytes) bytes_per_unit=$((1024 * 1024 * 1024));;
+    Tb|Tbit|Tbits)   bytes_per_unit=$((1024 * 1024 * 1024 * 1024 / 8));;
+    TB|TByte|TBytes) bytes_per_unit=$((1024 * 1024 * 1024 * 1024));;
+    *) echo Bad unit "$unit" && exit 1;;
+esac
+
+scalar=$((bytes_per_unit * dt))
+init_line=$(cat /proc/net/dev | grep "^[ ]*$iface:")
+if [ -z "$init_line" ]; then
+    echo Interface not found in /proc/net/dev: "$iface"
+    exit 1
+fi
+
+init_received=$(awk '{print $2}' <<< $init_line)
+init_sent=$(awk '{print $10}' <<< $init_line)
+
+(while true; do cat /proc/net/dev; sleep "$dt"; done) |\
+    stdbuf -oL grep "^[ ]*$iface:" |\
+    awk -v scalar="$scalar" -v unit="$unit" -v iface="$iface" '
+BEGIN{old_received='"$init_received"';old_sent='"$init_sent"'}
+{
+    received=$2
+    sent=$10
+    rx=(received-old_received)/scalar;
+    wx=(sent-old_sent)/scalar;
+    tx=rx+wr;
+    old_received=received;
+    old_sent=sent;
+    if(rx >= 0 && wx >= 0){
+        '"$printf_command"';
+        fflush(stdout);
+    }
+}
+'
--- a/config/i3/scripts/battery-pinebook-pro
+++ b/config/i3/scripts/battery-pinebook-pro
@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#simple Shellscript for i3blocks on Pinebook pro
+#05012020 geri123@gmx.net Gerhard S.
+#battery-symbols: on Manjaro you need the awesome-terminal-fonts package installed!
+PERCENT=$(cat /sys/class/power_supply/cw2015-battery/capacity)
+STATUS=$(cat /sys/class/power_supply/cw2015-battery/status)
+case $((
+ $PERCENT >= 0 && $PERCENT <= 20 ? 1 :
+ $PERCENT > 20 && $PERCENT <= 40 ? 2 :
+ $PERCENT > 40 && $PERCENT <= 60 ? 3 :
+ $PERCENT > 60 && $PERCENT <= 80 ? 4 : 5)) in
+#
+       (1) echo $STATUS:"" :$PERCENT%;;
+       (2) echo $STATUS:"" :$PERCENT%;;
+       (3) echo $STATUS:"" :$PERCENT%;;
+       (4) echo $STATUS:"" :$PERCENT%;;
+       (5) echo $STATUS:"" :$PERCENT%;;
+esac
--- a/config/i3/scripts/battery1
+++ b/config/i3/scripts/battery1
@ -0,0 +1,114 @@
+#!/usr/bin/perl
+#
+# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
+# Copyright 2014 Vivien Didelot <vivien@didelot.org>
+#
+# Licensed under the terms of the GNU GPL v3, or any later version.
+#
+# This script is meant to use with i3blocks. It parses the output of the "acpi"
+# command (often provided by a package of the same name) to read the status of
+# the battery, and eventually its remaining time (to full charge or discharge).
+#
+# The color will gradually change for a percentage below 85%, and the urgency
+# (exit code 33) is set if there is less that 5% remaining.
+
+# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
+
+use strict;
+use warnings;
+use utf8;
+
+# otherwise we get in console "Wide character in print at"
+binmode(STDOUT, ':utf8');
+
+# my $acpi;
+my $upower;
+my $percent;
+my $bat_state;
+my $status;
+my $ac_adapt;
+my $full_text;
+my $short_text;
+my $label = '😅';
+my $bat_number = $ENV{BLOCK_INSTANCE} || 0;
+
+open (UPOWER, "upower -i /org/freedesktop/UPower/devices/battery_BAT$bat_number | grep 'percentage' |") or die;
+$upower = <UPOWER>;
+close(UPOWER);
+
+# fail on unexpected output
+if ($upower !~ /:          (\d+)%/) {
+	die "$upower\n";
+}
+
+$percent = $1;
+$full_text = "$percent%";
+
+open (BAT_STATE, "upower -i /org/freedesktop/UPower/devices/battery_BAT$bat_number | grep 'state' |") or die;
+$bat_state = <BAT_STATE>;
+close(BAT_STATE);
+
+if ($bat_state !~ /:               (\w+)/) {
+	die "$bat_state\n";
+}
+$status = $1;
+
+if ($status eq 'discharging') {
+	$full_text .= ' ';
+} elsif ($status eq 'charging') {
+	$full_text .= ' ';
+} elsif ($status eq 'Unknown') {
+	open (AC_ADAPTER, "acpi -a |") or die;
+	$ac_adapt = <AC_ADAPTER>;
+	close(AC_ADAPTER);
+
+	if ($ac_adapt =~ /: ([\w-]+)/) {
+		$ac_adapt = $1;
+
+		if ($ac_adapt eq 'on-line') {
+			$full_text .= ' CHR';
+		} elsif ($ac_adapt eq 'off-line') {
+			$full_text .= ' DIS';
+		}
+	}
+}
+
+$short_text = $full_text;
+
+if ($percent < 20) {
+  $label = '';
+} elsif ($percent < 45) {
+  $label = '';
+} elsif ($percent < 70) {
+  $label = '';
+} elsif ($percent < 95) {
+  $label = '';
+} else {
+  $label = '';
+}
+
+# print text
+print " ${label}";
+print " $full_text\n";
+print " ${label}";
+print " $short_text\n";
+
+# consider color and urgent flag only on discharge
+if ($status eq 'discharging') {
+
+	if ($percent < 20) {
+		print "#FF0000\n";
+	} elsif ($percent < 40) {
+		print "#FFAE00\n";
+	} elsif ($percent < 60) {
+		print "#FFF600\n";
+	} elsif ($percent < 85) {
+		print "#A8FF00\n";
+	}
+
+	if ($percent < 5) {
+		exit(33);
+	}
+}
+
+exit(0);
--- a/config/i3/scripts/battery2
+++ b/config/i3/scripts/battery2
@ -0,0 +1,106 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2016 James Murphy
+# Licensed under the GPL version 2 only
+#
+# A battery indicator blocklet script for i3blocks
+
+from subprocess import check_output
+import os
+import re
+
+config = dict(os.environ)
+status = check_output(['acpi'], universal_newlines=True)
+
+if not status:
+    # stands for no battery found
+    color = config.get("color_10", "red")
+    fulltext = "<span color='{}'><span font='FontAwesome'>\uf00d \uf240</span></span>".format(color)
+    percentleft = 100
+else:
+    # if there is more than one battery in one laptop, the percentage left is
+    # available for each battery separately, although state and remaining
+    # time for overall block is shown in the status of the first battery
+    batteries = status.split("\n")
+    state_batteries=[]
+    commasplitstatus_batteries=[]
+    percentleft_batteries=[]
+    time = ""
+    for battery in batteries:
+        if battery!='':
+            state_batteries.append(battery.split(": ")[1].split(", ")[0])
+            commasplitstatus = battery.split(", ")
+            if not time:
+                time = commasplitstatus[-1].strip()
+                # check if it matches a time
+                time = re.match(r"(\d+):(\d+)", time)
+                if time:
+                    time = ":".join(time.groups())
+                    timeleft = " ({})".format(time)
+                else:
+                    timeleft = ""
+
+            p = int(commasplitstatus[1].rstrip("%\n"))
+            if p>0:
+                percentleft_batteries.append(p)
+            commasplitstatus_batteries.append(commasplitstatus)
+    state = state_batteries[0]
+    commasplitstatus = commasplitstatus_batteries[0]
+    if percentleft_batteries:
+        percentleft = int(sum(percentleft_batteries)/len(percentleft_batteries))
+    else:
+        percentleft = 0
+
+    # stands for charging
+    color = config.get("color_charging", "yellow")
+    FA_LIGHTNING = "<span color='{}'><span font='FontAwesome'>\uf0e7</span></span>".format(color)
+
+    # stands for plugged in
+    FA_PLUG = "<span font='FontAwesome'>\uf1e6</span>"
+
+    # stands for using battery
+    FA_BATTERY = "<span font='FontAwesome'>\uf240</span>"
+
+    # stands for unknown status of battery
+    FA_QUESTION = "<span font='FontAwesome'>\uf128</span>"
+
+
+    if state == "Discharging":
+        fulltext = FA_BATTERY + " "
+    elif state == "Full":
+        fulltext = FA_PLUG + " "
+        timeleft = ""
+    elif state == "Unknown":
+        fulltext = FA_QUESTION + " " + FA_BATTERY + " "
+        timeleft = ""
+    else:
+        fulltext = FA_LIGHTNING + " " + FA_PLUG + " "
+
+    def color(percent):
+        if percent < 10:
+            # exit code 33 will turn background red
+            return config.get("color_10", "#FFFFFF")
+        if percent < 20:
+            return config.get("color_20", "#FF3300")
+        if percent < 30:
+            return config.get("color_30", "#FF6600")
+        if percent < 40:
+            return config.get("color_40", "#FF9900")
+        if percent < 50:
+            return config.get("color_50", "#FFCC00")
+        if percent < 60:
+            return config.get("color_60", "#FFFF00")
+        if percent < 70:
+            return config.get("color_70", "#FFFF33")
+        if percent < 80:
+            return config.get("color_80", "#FFFF66")
+        return config.get("color_full", "#FFFFFF")
+
+    form =  '<span color="{}">{}%</span>'
+    fulltext += form.format(color(percentleft), percentleft)
+    #fulltext += timeleft
+
+print(fulltext)
+print(fulltext)
+if percentleft < 10:
+    exit(33)
--- a/config/i3/scripts/blur-lock
+++ b/config/i3/scripts/blur-lock
@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+PICTURE=/tmp/i3lock.png
+SCREENSHOT="scrot -z $PICTURE"
+
+BLUR="5x4"
+
+$SCREENSHOT
+convert $PICTURE -blur $BLUR $PICTURE
+i3lock -i $PICTURE
+rm $PICTURE
--- a/config/i3/scripts/cpu_usage
+++ b/config/i3/scripts/cpu_usage
@ -0,0 +1,62 @@
+#!/usr/bin/perl
+#
+# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
+# Copyright 2014 Vivien Didelot <vivien@didelot.org>
+# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
+#
+# Licensed under the terms of the GNU GPL v3, or any later version.
+
+use strict;
+use warnings;
+use utf8;
+use Getopt::Long;
+
+# default values
+my $t_warn = $ENV{T_WARN} // 50;
+my $t_crit = $ENV{T_CRIT} // 80;
+my $cpu_usage = -1;
+my $decimals = $ENV{DECIMALS} // 0;
+my $label = $ENV{LABEL} // "";
+
+sub help {
+    print "Usage: cpu_usage [-w <warning>] [-c <critical>] [-d <decimals>]\n";
+    print "-w <percent>: warning threshold to become yellow\n";
+    print "-c <percent>: critical threshold to become red\n";
+    print "-d <decimals>:  Use <decimals> decimals for percentage (default is $decimals) \n"; 
+    exit 0;
+}
+
+GetOptions("help|h" => \&help,
+           "w=i"    => \$t_warn,
+           "c=i"    => \$t_crit,
+           "d=i"    => \$decimals,
+);
+
+# Get CPU usage
+$ENV{LC_ALL}="en_US"; # if mpstat is not run under en_US locale, things may break, so make sure it is
+open (MPSTAT, 'mpstat 1 1 |') or die;
+while (<MPSTAT>) {
+    if (/^.*\s+(\d+\.\d+)[\s\x00]?$/) {
+        $cpu_usage = 100 - $1; # 100% - %idle
+        last;
+    }
+}
+close(MPSTAT);
+
+$cpu_usage eq -1 and die 'Can\'t find CPU information';
+
+# Print short_text, full_text
+print "${label}";
+printf "%02.${decimals}f%%\n", $cpu_usage;
+print "${label}";
+printf "%02.${decimals}f%%\n", $cpu_usage;
+
+# Print color, if needed
+if ($cpu_usage >= $t_crit) {
+    print "#FF0000\n";
+    exit 33;
+} elsif ($cpu_usage >= $t_warn) {
+    print "#FFFC00\n";
+}
+
+exit 0;
--- a/config/i3/scripts/disk
+++ b/config/i3/scripts/disk
@ -0,0 +1,48 @@
+#!/usr/bin/env bash
+# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+DIR="${DIR:-$BLOCK_INSTANCE}"
+DIR="${DIR:-$HOME}"
+ALERT_LOW="${ALERT_LOW:-$1}"
+ALERT_LOW="${ALERT_LOW:-10}" # color will turn red under this value (default: 10%)
+
+LOCAL_FLAG="-l"
+if [ "$1" = "-n" ] || [ "$2" = "-n" ]; then
+    LOCAL_FLAG=""
+fi
+
+df -h -P $LOCAL_FLAG "$DIR" | awk -v label="$LABEL" -v alert_low=$ALERT_LOW '
+/\/.*/ {
+	# full text
+	print label $4
+
+	# short text
+	print label $4
+
+	use=$5
+
+	# no need to continue parsing
+	exit 0
+}
+
+END {
+	gsub(/%$/,"",use)
+	if (100 - use < alert_low) {
+		# color
+		print "#FF0000"
+	}
+}
+'
--- a/config/i3/scripts/empty_workspace
+++ b/config/i3/scripts/empty_workspace
@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+MAX_DESKTOPS=20
+
+WORKSPACES=$(seq -s '\n' 1 1 ${MAX_DESKTOPS})
+
+EMPTY_WORKSPACE=$( (i3-msg -t get_workspaces | tr ',' '\n' | grep num | awk -F:  '{print int($2)}' ; \
+            echo -e ${WORKSPACES} ) | sort -n | uniq -u | head -n 1)
+
+i3-msg workspace ${EMPTY_WORKSPACE}
--- a/config/i3/scripts/keyboard-layout
+++ b/config/i3/scripts/keyboard-layout
@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+KBD=$(/usr/bin/xkblayout-state print '%s')
+echo $KBD
+
--- a/config/i3/scripts/keyhint
+++ b/config/i3/scripts/keyhint
@ -0,0 +1,25 @@
+#!/bin/bash
+
+Main() {
+    source /usr/share/endeavouros/scripts/eos-script-lib-yad || return 1
+
+    local command=(
+        eos_yad --title="EndeavourOS i3-wm keybindings:" --no-buttons --geometry=400x345-15-400 --list
+        --column=key: --column=description: --column=command:
+        "ESC" "close this app" ""
+        "=" "modkey" "(set mod Mod4)"
+        "+enter" "open a terminal" ""
+        "+Shift+n" "new empty workspace" ""
+        "+w" "open Browser" ""
+        "+n" "open Filebrowser" ""
+        "+d" "app menu" ""
+        "+q" "close focused app" ""
+        "Print-key" "screenshot" ""
+        "+Shift+e" "logout menu" ""
+        "F1" "open keybinding helper" ""
+    )
+
+    "${command[@]}"
+}
+
+Main "$@"
--- a/config/i3/scripts/keyhint-2
+++ b/config/i3/scripts/keyhint-2
@ -0,0 +1,6 @@
+I3_CONFIG=$HOME/.config/i3/config
+mod_key=$(sed -nre 's/^set \$mod (.*)/\1/p' ${I3_CONFIG})
+grep "^bindsym" ${I3_CONFIG} \
+    | sed "s/-\(-\w\+\)\+//g;s/\$mod/${mod_key}/g;s/Mod1/Alt/g;s/exec //;s/bindsym //;s/^\s\+//;s/^\([^ ]\+\) \(.\+\)$/\2: \1/;s/^\s\+//" \
+    | tr -s ' ' \
+    | rofi -dmenu -theme ~/.config/rofi/rofikeyhint.rasi
--- a/config/i3/scripts/memory
+++ b/config/i3/scripts/memory
@ -0,0 +1,69 @@
+#!/usr/bin/env bash
+# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+TYPE="${BLOCK_INSTANCE:-mem}"
+
+awk -v type=$TYPE '
+/^MemTotal:/ {
+	mem_total=$2
+}
+/^MemFree:/ {
+	mem_free=$2
+}
+/^Buffers:/ {
+	mem_free+=$2
+}
+/^Cached:/ {
+	mem_free+=$2
+}
+/^SwapTotal:/ {
+	swap_total=$2
+}
+/^SwapFree:/ {
+	swap_free=$2
+}
+END {
+	if (type == "swap") {
+		free=swap_free/1024/1024
+		used=(swap_total-swap_free)/1024/1024
+		total=swap_total/1024/1024
+	} else {
+		free=mem_free/1024/1024
+		used=(mem_total-mem_free)/1024/1024
+		total=mem_total/1024/1024
+	}
+
+	pct=0
+	if (total > 0) {
+		pct=used/total*100
+	}
+
+	# full text
+	# printf("%.1fG/%.1fG (%.f%%)\n", used, total, pct)
+
+	# short text
+	printf("%.f%%\n", pct)
+
+	# color
+	if (pct > 90) {
+		print("#FF0000")
+	} else if (pct > 80) {
+		print("#FFAE00")
+	} else if (pct > 70) {
+		print("#FFF600")
+	}
+}
+' /proc/meminfo
--- a/config/i3/scripts/openweather
+++ b/config/i3/scripts/openweather
@ -0,0 +1,93 @@
+#!/usr/bin/env bash
+# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
+
+temps=("#0600FF" "#0500FF" "#0400FF" "#0300FF" "#0200FF" "#0100FF" "#0000FF" "#0002FF" "#0012FF" "#0022FF" "#0032FF" "#0044FF" "#0054FF" "#0064FF" "#0074FF" "#0084FF" "#0094FF" "#00A4FF" "#00B4FF" "#00C4FF" "#00D4FF" "#00E4FF" "#00FFF4" "#00FFD0" "#00FFA8" "#00FF83" "#00FF5C" "#00FF36" "#00FF10" "#17FF00" "#3EFF00" "#65FF00" "#B0FF00" "#FDFF00" "#FFF000" "#FFDC00" "#FFC800" "#FFB400" "#FFA000" "#FF8C00" "#FF7800" "#FF6400" "#FF5000" "#FF3C00" "#FF2800" "#FF1400" "#FF0000")
+
+command -v jq >/dev/null 2>&1 || { echo >&2 "Program 'jq' required but it is not installed.  
+Aborting."; exit 1; }
+command -v wget >/dev/null 2>&1 || { echo >&2 "Program 'wget' required but is not installed.  
+Aborting."; exit 1; }
+
+# To use this script you need to create an API key here https://home.openweathermap.org
+# You need to put your Open Weather APIKEY here:
+APIKEY="keykeykey"
+# And get your Latitute and Longitudes to put in here:
+LAT="XX.XXXX"
+LON="XX.XXXX"
+URL="http://api.openweathermap.org/data/2.5/onecall?lat=${LAT}&lon=${LON}&units=metric&exclude=minutely,hourly,daily&APPID=${APIKEY}"
+WEATHER_RESPONSE=$(wget -qO- "${URL}")
+
+WEATHER_CONDITION=$(echo "$WEATHER_RESPONSE" | jq '.current.weather[0].main' | sed 's/"//g')
+WEATHER_TEMP=$(echo "$WEATHER_RESPONSE" | jq '.current.feels_like')
+WEATHER_INT=${WEATHER_TEMP%.*}
+
+TIME_NOW=$( echo "$WEATHER_RESPONSE" | jq '.current.dt')
+SUNRISE=$( echo "$WEATHER_RESPONSE" | jq '.current.sunrise')
+SUNSET=$( echo "$WEATHER_RESPONSE" | jq '.current.sunset')
+DESCRIPTION=$( echo "$WEATHER_RESPONSE" | jq '.current.weather[0].description' | sed 's/"//g')
+WEATHER_ALERT=$( echo "$WEATHER_RESPONSE" | jq '.alerts[0].event' | sed 's/"//g')
+DAYTIME="n"
+
+if [[ "$TIME_NOW" > "$SUNRISE" ]] && [[ "$TIME_NOW" < "$SUNSET" ]]; then
+    DAYTIME="d"
+fi
+
+case $WEATHER_CONDITION in
+  'Clouds')
+    if [ "$DAYTIME" == "d" ]; then
+        WEATHER_ICON=""
+    else
+        WEATHER_ICON=""
+    fi
+    ;;
+  'Rain')
+    WEATHER_ICON=""
+    ;;
+  'Drizzle')
+    if [ "$DAYTIME" == "d" ]; then
+        WEATHER_ICON="" 
+    else
+        WEATHER_ICON=""
+    fi
+    ;;
+  'Thunderstorm')
+    WEATHER_ICON=""
+    ;;
+  'Snow')
+    WEATHER_ICON=""
+    ;;
+  'Clear')
+    if [ "$DAYTIME" == "d" ]; then
+        WEATHER_ICON=""
+    else
+        WEATHER_ICON=""
+    fi
+    ;;
+  *)
+    WEATHER_ICON="🌫"
+    ;;
+esac
+
+WEATHER_COLOR="#FFFFFF"
+if [ "$WEATHER_INT" -lt "-11" ]; then
+    WEATHER_COLOR="#0000FF"
+elif [ "$WEATHER_INT" -gt 35 ]; then
+    WEATHER_COLOR="#FF0000"
+else
+    WEATHER_INT=$(( WEATHER_INT + 11 )) 
+    WEATHER_COLOR="${temps[$WEATHER_INT]}"
+fi
+
+full_text="${WEATHER_ICON}  ${WEATHER_TEMP}°C: ${DESCRIPTION} "
+if [ "$WEATHER_ALERT" != "null" ]; then
+    WARN_START=$(echo "$WEATHER_RESPONSE" | jq '.alerts[0].start')
+    WARN_END=$(echo "$WEATHER_RESPONSE" | jq '.alerts[0].end')
+    WARN_START=$(date -d @"$WARN_START" +%a_%k:%M)
+    WARN_END=$(date -d @"$WARN_END" +%a_%k:%M)
+    full_text="${WEATHER_ICON}  ${WEATHER_TEMP}°C: ${DESCRIPTION}  ${WEATHER_ALERT} from ${WARN_START} to ${WARN_END}  "
+fi
+
+
+echo "${full_text}"
+echo "${WEATHER_TEMP}°C "
+echo "${WEATHER_COLOR}"
--- a/config/i3/scripts/openweather-city
+++ b/config/i3/scripts/openweather-city
@ -0,0 +1,43 @@
+#!/usr/bin/env bash
+
+command -v jq >/dev/null 2>&1 || { echo >&2 "Program 'jq' required but it is not installed.
+Aborting."; exit 1; }
+command -v wget >/dev/null 2>&1 || { echo >&2 "Program 'wget' required but is not installed.
+Aborting."; exit 1; }
+
+# To use this script you need to create an API key here https://home.openweathermap.org
+# You need to put your Open Weather APIKEY here:
+APIKEY="keykey"
+# find your City ID here: https://openweathermap.org/
+# search for your city and copy the ID from the URL inside the browser.
+CITY_ID="idid"
+URL="http://api.openweathermap.org/data/2.5/weather?id=${CITY_ID}&units=metric&APPID=${APIKEY}"
+
+WEATHER_RESPONSE=$(wget -qO- "${URL}")
+
+WEATHER_CONDITION=$(echo $WEATHER_RESPONSE | jq '.weather[0].main' | sed 's/"//g')
+WEATHER_TEMP=$(echo $WEATHER_RESPONSE | jq '.main.temp')
+WIND_DIR=$( echo "$WEATHER_RESPONSE" | jq '.wind.deg')
+WIND_SPEED=$( echo "$WEATHER_RESPONSE" | jq '.wind.speed')
+
+WIND_SPEED=$(awk "BEGIN {print 60*60*$WIND_SPEED/1000}")
+WIND_DIR=$(awk "BEGIN {print int(($WIND_DIR % 360)/22.5)}")
+DIR_ARRAY=( N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW N )
+WIND_DIR=${DIR_ARRAY[WIND_DIR]}
+
+case $WEATHER_CONDITION in
+  'Clouds')
+    WEATHER_ICON=""
+    ;;
+  'Rain')
+    WEATHER_ICON=""
+    ;;
+  'Snow')
+    WEATHER_ICON=""
+    ;;
+  *)
+    WEATHER_ICON=""
+    ;;
+esac
+
+echo "${WEATHER_ICON}  ${WEATHER_TEMP}°C: ${WIND_SPEED} km/h ${WIND_DIR}"
--- a/config/i3/scripts/openweather.conf
+++ b/config/i3/scripts/openweather.conf
@ -0,0 +1,5 @@
+# Weather
+[Weather]
+command=~/.config/i3/scripts/openweather
+interval=1800
+color=#7275b3
--- a/config/i3/scripts/power-profiles
+++ b/config/i3/scripts/power-profiles
@ -0,0 +1,190 @@
+#!/usr/bin/env bash
+#
+# Use rofi/zenity to change system runstate thanks to systemd.
+#
+# Note: this currently relies on associative array support in the shell.
+#
+# Inspired from i3pystatus wiki:
+# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu
+#
+# Copyright 2015 Benjamin Chrétien <chretien at lirmm dot fr>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# power-profiles-daemon implementation:
+# needs package power-profiles-daemon installed and the service running see here:
+# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
+# used in i3-blocks: ~/.config/i3/i3blocks.conf together with: ~/.config/i3/scripts/ppd-status
+
+
+#######################################################################
+#                            BEGIN CONFIG                             #
+#######################################################################
+
+# Use a custom lock script
+#LOCKSCRIPT="i3lock-extra -m pixelize"
+
+# Colors: FG (foreground), BG (background), HL (highlighted)
+FG_COLOR="#bbbbbb"
+BG_COLOR="#111111"
+HLFG_COLOR="#111111"
+HLBG_COLOR="#bbbbbb"
+BORDER_COLOR="#222222"
+
+# Options not related to colors
+#ROFI_TEXT=":"
+#ROFI_OPTIONS=(-width -11 -location 0 -hide-scrollbar -bw 30 -color-window "#dd310027,#dd0310027,#dd310027" -padding 5)
+#ROFI_OPTIONS=(-width -18 -location 4 -hide-scrollbar -color-window "#cc310027,#00a0009a,#cc310027" -padding 5 -font "Sourcecode Pro Regular 10, FontAwesome 9")
+ROFI_OPTIONS=(-theme ~/.config/rofi/power-profiles.rasi)
+# Zenity options
+ZENITY_TITLE="Power Profiles"
+ZENITY_TEXT="Set Profiles:"
+ZENITY_OPTIONS=(--column= --hide-header)
+
+#######################################################################
+#                             END CONFIG                              #
+#######################################################################
+
+# Whether to ask for user's confirmation
+enable_confirmation=false
+
+# Preferred launcher if both are available
+preferred_launcher="rofi"
+
+usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc.
+
+where:
+    -h  show this help text
+    -c  ask for user confirmation
+    -p  preferred launcher (rofi or zenity)
+
+This script depends on:
+  - systemd,
+  - i3,
+  - rofi or zenity."
+
+# Check whether the user-defined launcher is valid
+launcher_list=(rofi zenity)
+function check_launcher() {
+  if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then
+    echo "Supported launchers: ${launcher_list[*]}"
+    exit 1
+  else
+    # Get array with unique elements and preferred launcher first
+    # Note: uniq expects a sorted list, so we cannot use it
+    i=1
+    launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \
+      | sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' '))
+  fi
+}
+
+# Parse CLI arguments
+while getopts "hcp:" option; do
+  case "${option}" in
+    h) echo "${usage}"
+       exit 0
+       ;;
+    c) enable_confirmation=true
+       ;;
+    p) preferred_launcher="${OPTARG}"
+       check_launcher "${preferred_launcher}"
+       ;;
+    *) exit 1
+       ;;
+  esac
+done
+
+# Check whether a command exists
+function command_exists() {
+  command -v "$1" &> /dev/null 2>&1
+}
+
+# systemctl required
+if ! command_exists systemctl ; then
+  exit 1
+fi
+
+# menu defined as an associative array
+typeset -A menu
+
+# Menu with keys/commands
+
+menu=(
+  [ Performance]="powerprofilesctl set performance"
+  [ Balanced]="powerprofilesctl set balanced"
+  [ Power Saver]="powerprofilesctl set power-saver"
+  [ Cancel]=""
+)
+
+menu_nrows=${#menu[@]}
+
+# Menu entries that may trigger a confirmation message
+menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout"
+
+launcher_exe=""
+launcher_options=""
+rofi_colors=""
+
+function prepare_launcher() {
+  if [[ "$1" == "rofi" ]]; then
+    rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \
+        -hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}")
+    launcher_exe="rofi"
+    launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \
+        "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+  elif [[ "$1" == "zenity" ]]; then
+    launcher_exe="zenity"
+    launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \
+        "${ZENITY_OPTIONS[@]}")
+  fi
+}
+
+for l in "${launcher_list[@]}"; do
+  if command_exists "${l}" ; then
+    prepare_launcher "${l}"
+    break
+  fi
+done
+
+# No launcher available
+if [[ -z "${launcher_exe}" ]]; then
+  exit 1
+fi
+
+launcher=(${launcher_exe} "${launcher_options[@]}")
+selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")"
+
+function ask_confirmation() {
+  if [ "${launcher_exe}" == "rofi" ]; then
+    confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \
+      "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+    [ "${confirmed}" == "Yes" ] && confirmed=0
+  elif [ "${launcher_exe}" == "zenity" ]; then
+    zenity --question --text "Are you sure you want to ${selection,,}?"
+    confirmed=$?
+  fi
+
+  if [ "${confirmed}" == 0 ]; then
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+}
+
+if [[ $? -eq 0 && ! -z ${selection} ]]; then
+  if [[ "${enable_confirmation}" = true && \
+        ${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then
+    ask_confirmation
+  else
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+fi
--- a/config/i3/scripts/powermenu
+++ b/config/i3/scripts/powermenu
@ -0,0 +1,186 @@
+#!/usr/bin/env bash
+#
+# Use rofi/zenity to change system runstate thanks to systemd.
+#
+# Note: this currently relies on associative array support in the shell.
+#
+# Inspired from i3pystatus wiki:
+# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu
+#
+# Copyright 2015 Benjamin Chrétien <chretien at lirmm dot fr>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# modified to work with latest rofi update by joekamprad <joekamprad@endeavouros.com>
+
+#######################################################################
+#                            BEGIN CONFIG                             #
+#######################################################################
+
+# Use a custom lock script
+#LOCKSCRIPT="i3lock-extra -m pixelize"
+
+# Colors: FG (foreground), BG (background), HL (highlighted)
+FG_COLOR="#bbbbbb"
+BG_COLOR="#111111"
+HLFG_COLOR="#111111"
+HLBG_COLOR="#bbbbbb"
+BORDER_COLOR="#222222"
+
+# Options not related to colors (most rofi options do not work anymore)
+ROFI_OPTIONS=(-theme ~/.config/rofi/powermenu.rasi)
+# Zenity options
+ZENITY_TITLE="Power Menu"
+ZENITY_TEXT="Action:"
+ZENITY_OPTIONS=(--column= --hide-header)
+
+#######################################################################
+#                             END CONFIG                              #
+#######################################################################
+
+# Whether to ask for user's confirmation
+enable_confirmation=false
+
+# Preferred launcher if both are available
+preferred_launcher="rofi"
+
+usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc.
+
+where:
+    -h  show this help text
+    -c  ask for user confirmation
+    -p  preferred launcher (rofi or zenity)
+
+This script depends on:
+  - systemd,
+  - i3,
+  - rofi or zenity."
+
+# Check whether the user-defined launcher is valid
+launcher_list=(rofi zenity)
+function check_launcher() {
+  if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then
+    echo "Supported launchers: ${launcher_list[*]}"
+    exit 1
+  else
+    # Get array with unique elements and preferred launcher first
+    # Note: uniq expects a sorted list, so we cannot use it
+    i=1
+    launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \
+      | sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' '))
+  fi
+}
+
+# Parse CLI arguments
+while getopts "hcp:" option; do
+  case "${option}" in
+    h) echo "${usage}"
+       exit 0
+       ;;
+    c) enable_confirmation=true
+       ;;
+    p) preferred_launcher="${OPTARG}"
+       check_launcher "${preferred_launcher}"
+       ;;
+    *) exit 1
+       ;;
+  esac
+done
+
+# Check whether a command exists
+function command_exists() {
+  command -v "$1" &> /dev/null 2>&1
+}
+
+# systemctl required
+if ! command_exists systemctl ; then
+  exit 1
+fi
+
+# menu defined as an associative array
+typeset -A menu
+
+# Menu with keys/commands
+
+menu=(
+  [ Shutdown]="systemctl poweroff"
+  [ Reboot]="systemctl reboot"
+  [ Suspend]="systemctl suspend"
+  [ Hibernate]="systemctl hibernate"
+  [ Lock]="~/.config/i3/scripts/blur-lock"
+  [ Logout]="i3-msg exit"
+  [ Cancel]=""
+)
+
+menu_nrows=${#menu[@]}
+
+# Menu entries that may trigger a confirmation message
+menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout"
+
+launcher_exe=""
+launcher_options=""
+rofi_colors=""
+
+function prepare_launcher() {
+  if [[ "$1" == "rofi" ]]; then
+    rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \
+        -hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}")
+    launcher_exe="rofi"
+    launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \
+        "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+  elif [[ "$1" == "zenity" ]]; then
+    launcher_exe="zenity"
+    launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \
+        "${ZENITY_OPTIONS[@]}")
+  fi
+}
+
+for l in "${launcher_list[@]}"; do
+  if command_exists "${l}" ; then
+    prepare_launcher "${l}"
+    break
+  fi
+done
+
+# No launcher available
+if [[ -z "${launcher_exe}" ]]; then
+  exit 1
+fi
+
+launcher=(${launcher_exe} "${launcher_options[@]}")
+selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")"
+
+function ask_confirmation() {
+  if [ "${launcher_exe}" == "rofi" ]; then
+    confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \
+      "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+    [ "${confirmed}" == "Yes" ] && confirmed=0
+  elif [ "${launcher_exe}" == "zenity" ]; then
+    zenity --question --text "Are you sure you want to ${selection,,}?"
+    confirmed=$?
+  fi
+
+  if [ "${confirmed}" == 0 ]; then
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+}
+
+if [[ $? -eq 0 && ! -z ${selection} ]]; then
+  if [[ "${enable_confirmation}" = true && \
+        ${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then
+    ask_confirmation
+  else
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+fi
--- a/config/i3/scripts/ppd-status
+++ b/config/i3/scripts/ppd-status
@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+#
+# power-profiles-daemon implementation:
+# needs package power-profiles-daemon installed and the service running see here:
+# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
+# used in i3-blocks: ~/.config/i3/i3blocks.conf together with: ~/.config/i3/scripts/power-profiles
+
+# script to show current power profile
+
+current_profile=$(/usr/bin/powerprofilesctl get)
+echo "$current_profile"
--- a/config/i3/scripts/temperature
+++ b/config/i3/scripts/temperature
@ -0,0 +1,86 @@
+#!/usr/bin/env perl
+# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
+# Copyright 2014 Vivien Didelot <vivien@didelot.org>
+# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
+# Copyright 2014 Benjamin Chretien <chretien at lirmm dot fr>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
+
+use strict;
+use warnings;
+use utf8;
+use Getopt::Long;
+
+binmode(STDOUT, ":utf8");
+
+# default values
+my $t_warn = $ENV{T_WARN} || 70;
+my $t_crit = $ENV{T_CRIT} || 90;
+my $chip = $ENV{SENSOR_CHIP} || "";
+my $temperature = -9999;
+my $label = "😀 ";
+
+sub help {
+    print "Usage: temperature [-w <warning>] [-c <critical>] [--chip <chip>]\n";
+    print "-w <percent>: warning threshold to become yellow\n";
+    print "-c <percent>: critical threshold to become red\n";
+    print "--chip <chip>: sensor chip\n";
+    exit 0;
+}
+
+GetOptions("help|h" => \&help,
+           "w=i"    => \$t_warn,
+           "c=i"    => \$t_crit,
+           "chip=s" => \$chip);
+
+# Get chip temperature
+open (SENSORS, "sensors -u $chip |") or die;
+while (<SENSORS>) {
+    if (/^\s+temp1_input:\s+[\+]*([\-]*\d+\.\d)/) {
+        $temperature = $1;
+        last;
+    }
+}
+close(SENSORS);
+
+$temperature eq -9999 and die 'Cannot find temperature';
+
+if ($temperature < 45) {
+  $label = '';
+} elsif ($temperature < 55) {
+  $label = '';
+} elsif ($temperature < 65) {
+  $label = '';
+} elsif ($temperature < 75) {
+  $label = '';
+} else {
+  $label = '';
+}
+# Print short_text, full_text
+print "${label}";
+print " $temperature°C\n";
+print "${label}";
+print " $temperature°C\n";
+
+# Print color, if needed
+if ($temperature >= $t_crit) {
+    print "#FF0000\n";
+    exit 33;
+} elsif ($temperature >= $t_warn) {
+    print "#FFFC00\n";
+}
+
+exit 0;
--- a/config/i3/scripts/volume
+++ b/config/i3/scripts/volume
@ -0,0 +1,93 @@
+#!/usr/bin/env bash
+# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
+# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# original source: https://github.com/vivien/i3blocks-contrib/tree/master/volume
+# check the readme: https://github.com/vivien/i3blocks-contrib/blob/master/volume/README.md
+#------------------------------------------------------------------------
+
+# The second parameter overrides the mixer selection
+# For PulseAudio users, eventually use "pulse"
+# For Jack/Jack2 users, use "jackplug"
+# For ALSA users, you may use "default" for your primary card
+# or you may use hw:# where # is the number of the card desired
+if [[ -z "$MIXER" ]] ; then
+    MIXER="default"
+    if command -v pulseaudio >/dev/null 2>&1 && pulseaudio --check ; then
+        # pulseaudio is running, but not all installations use "pulse"
+        if amixer -D pulse info >/dev/null 2>&1 ; then
+            MIXER="pulse"
+        fi
+    fi
+    [ -n "$(lsmod | grep jack)" ] && MIXER="jackplug"
+    MIXER="${2:-$MIXER}"
+fi
+
+# The instance option sets the control to report and configure
+# This defaults to the first control of your selected mixer
+# For a list of the available, use `amixer -D $Your_Mixer scontrols`
+if [[ -z "$SCONTROL" ]] ; then
+    SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols |
+                      sed -n "s/Simple mixer control '\([^']*\)',0/\1/p" |
+                      head -n1
+                    )}"
+fi
+
+# The first parameter sets the step to change the volume by (and units to display)
+# This may be in in % or dB (eg. 5% or 3dB)
+if [[ -z "$STEP" ]] ; then
+    STEP="${1:-5%}"
+fi
+
+# AMIXER(1):
+# "Use the mapped volume for evaluating the percentage representation like alsamixer, to be
+# more natural for human ear."
+NATURAL_MAPPING=${NATURAL_MAPPING:-0}
+if [[ "$NATURAL_MAPPING" != "0" ]] ; then
+    AMIXER_PARAMS="-M"
+fi
+
+#------------------------------------------------------------------------
+
+capability() { # Return "Capture" if the device is a capture device
+  amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL |
+    sed -n "s/  Capabilities:.*cvolume.*/Capture/p"
+}
+
+volume() {
+  amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL $(capability)
+}
+
+format() {
+  
+  perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)'
+  perl_filter+='{CORE::say $4 eq "off" ? "MUTE" : "'
+  # If dB was selected, print that instead
+  perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
+  perl_filter+='"; exit}'
+  output=$(perl -ne "$perl_filter")
+  echo "$LABEL$output"
+}
+
+#------------------------------------------------------------------------
+
+case $BLOCK_BUTTON in
+  3) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) toggle ;;  # right click, mute/unmute
+  4) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ unmute ;; # scroll up, increase
+  5) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- unmute ;; # scroll down, decrease
+esac
+
+volume | format
--- a/config/i3/scripts/vpn
+++ b/config/i3/scripts/vpn
@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+#
+# Copyright (C) 2021 Andreas Lindlbauer
+# Licensed under the terms of EUPLv1.2.
+#
+# i3blocks blocklet script to monitor the (nord)vpn connection
+
+vpnstatus="📢"
+nordvpn_output=$(nordvpn status | cat -v | head -1 | sed -e 's/\^M-^M  ^M//g' )
+if [ "${nordvpn_output}" = "Status: Connected" ]; then
+    vpnstatus="🥸"
+elif [ "${nordvpn_output}" = "A new version of NordVPN is available! Please update the application." ]; then
+    nordvpn_output=$(nordvpn status | cat -v | head -2 | tail -1 | sed -e 's/\^M-^M  ^M//g' )
+    if [ "${nordvpn_output}" = "Status: Connected" ]; then
+        vpnstatus="🥴"
+    elif [ "${nordvpn_output}" = "Status: Disconnected" ]; then
+        vpnstatus="📢"
+    fi
+elif [ "${nordvpn_output}" = "Status: Disconnected" ]; then
+    vpnstatus="📢"
+elif [[ "$nordvpn_output" == *\/* ]] || [[ "$nordvpn_output" == *\\* ]]; then
+    vpnstatus="Something's very wrong"
+fi
+
+echo "$vpnstatus"
--- a/config/nano/nanorc
+++ b/config/nano/nanorc
@ -0,0 +1,2 @@
+include /usr/share/nano/*.nanorc
+include /usr/share/nano-syntax-highlighting/*.nanorc
--- a/config/rofi/arc_dark_colors.rasi
+++ b/config/rofi/arc_dark_colors.rasi
@ -0,0 +1,34 @@
+/*******************************************************
+ * ROFI Arc Dark colors for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+* {
+    selected-normal-foreground:  rgba ( 249, 249, 249, 100 % );
+    foreground:                  rgba ( 196, 203, 212, 100 % );
+    normal-foreground:           @foreground;
+    alternate-normal-background: rgba ( 64, 69, 82, 59 % );
+    red:                         rgba ( 220, 50, 47, 100 % );
+    selected-urgent-foreground:  rgba ( 249, 249, 249, 100 % );
+    blue:                        rgba ( 38, 139, 210, 100 % );
+    urgent-foreground:           rgba ( 204, 102, 102, 100 % );
+    alternate-urgent-background: rgba ( 75, 81, 96, 90 % );
+    active-foreground:           rgba ( 101, 172, 255, 100 % );
+    lightbg:                     rgba ( 238, 232, 213, 100 % );
+    selected-active-foreground:  rgba ( 249, 249, 249, 100 % );
+    alternate-active-background: rgba ( 75, 81, 96, 89 % );
+    background:                  rgba ( 45, 48, 59, 95 % );
+    alternate-normal-foreground: @foreground;
+    normal-background:           @background;
+    lightfg:                     rgba ( 88, 104, 117, 100 % );
+    selected-normal-background:  rgba ( 64, 132, 214, 100 % );
+    border-color:                rgba ( 124, 131, 137, 100 % );
+    spacing:                     2;
+    separatorcolor:              rgba ( 29, 31, 33, 100 % );
+    urgent-background:           rgba ( 29, 31, 33, 17 % );
+    selected-urgent-background:  rgba ( 165, 66, 66, 100 % );
+    alternate-urgent-foreground: @urgent-foreground;
+    background-color:            rgba ( 0, 0, 0, 0 % );
+    alternate-active-foreground: @active-foreground;
+    active-background:           rgba ( 29, 31, 33, 17 % );
+    selected-active-background:  rgba ( 68, 145, 237, 100 % );
+}
--- a/config/rofi/arc_dark_transparent_colors.rasi
+++ b/config/rofi/arc_dark_transparent_colors.rasi
@ -0,0 +1,34 @@
+/*******************************************************
+ * ROFI Arch Dark Transparent colors for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+* {
+    selected-normal-foreground:  rgba ( 255, 147, 5, 100 % );
+    foreground:                  rgba ( 196, 203, 212, 100 % );
+    normal-foreground:           @foreground;
+    alternate-normal-background: rgba ( 45, 48, 59, 1 % );
+    red:                         rgba ( 220, 50, 47, 100 % );
+    selected-urgent-foreground:  rgba ( 249, 249, 249, 100 % );
+    blue:                        rgba ( 38, 139, 210, 100 % );
+    urgent-foreground:           rgba ( 204, 102, 102, 100 % );
+    alternate-urgent-background: rgba ( 75, 81, 96, 90 % );
+    active-foreground:           rgba ( 101, 172, 255, 100 % );
+    lightbg:                     rgba ( 238, 232, 213, 100 % );
+    selected-active-foreground:  rgba ( 249, 249, 249, 100 % );
+    alternate-active-background: rgba ( 45, 48, 59, 88 % );
+    background:                  rgba ( 45, 48, 59, 88 % );
+    alternate-normal-foreground: @foreground;
+    normal-background:           rgba ( 45, 48, 59, 1 % );
+    lightfg:                     rgba ( 88, 104, 117, 100 % );
+    selected-normal-background:  rgba ( 24, 26, 32, 100 % );
+    border-color:                rgba ( 124, 131, 137, 100 % );
+    spacing:                     2;
+    separatorcolor:              rgba ( 45, 48, 59, 1 % );
+    urgent-background:           rgba ( 45, 48, 59, 15 % );
+    selected-urgent-background:  rgba ( 165, 66, 66, 100 % );
+    alternate-urgent-foreground: @urgent-foreground;
+    background-color:            rgba ( 0, 0, 0, 0 % );
+    alternate-active-foreground: @active-foreground;
+    active-background:           rgba ( 29, 31, 33, 17 % );
+    selected-active-background:  rgba ( 26, 28, 35, 100 % );
+}
--- a/config/rofi/power-profiles.rasi
+++ b/config/rofi/power-profiles.rasi
@ -0,0 +1,121 @@
+/*******************************************************
+ * ROFI configs i3 powermenu for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+configuration {
+    font:             "Noto Sans Regular 10";
+    show-icons:       false;
+    icon-theme:       "Qogir";
+    scroll-method:    0;
+    disable-history:  false;
+    fullscreen:       false;
+    hide-scrollbar:   true;
+    sidebar-mode:     false;
+}
+
+@import "~/.config/rofi/arc_dark_colors.rasi"
+
+
+window {
+    background-color: @background;
+    border:           0;
+    padding:          10;
+    transparency:     "real";
+    width:            170px;
+    location:         east;
+    /*y-offset:       18;*/
+    /*x-offset:       850;*/
+}
+listview {
+    lines:   4;
+    columns: 1;
+}
+element {
+    border:  0;
+    padding: 1px;
+}
+element-text {
+    background-color: inherit;
+    text-color:       inherit;
+}
+element.normal.normal {
+    background-color: @normal-background;
+    text-color:       @normal-foreground;
+}
+element.normal.urgent {
+    background-color: @urgent-background;
+    text-color:       @urgent-foreground;
+}
+element.normal.active {
+    background-color: @active-background;
+    text-color:       @active-foreground;
+}
+element.selected.normal {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+element.selected.urgent {
+    background-color: @selected-urgent-background;
+    text-color:       @selected-urgent-foreground;
+}
+element.selected.active {
+    background-color: @selected-active-background;
+    text-color:       @selected-active-foreground;
+}
+element.alternate.normal {
+    background-color: @alternate-normal-background;
+    text-color:       @alternate-normal-foreground;
+}
+element.alternate.urgent {
+    background-color: @alternate-urgent-background;
+    text-color:       @alternate-urgent-foreground;
+}
+element.alternate.active {
+    background-color: @alternate-active-background;
+    text-color:       @alternate-active-foreground;
+}
+scrollbar {
+    width:        4px;
+    border:       0;
+    handle-color: @normal-foreground;
+    handle-width: 8px;
+    padding:      0;
+}
+mode-switcher {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+}
+button {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+button.selected {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+inputbar {
+    spacing:    0;
+    text-color: @normal-foreground;
+    padding:    1px;
+}
+case-indicator {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+entry {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+prompt {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+inputbar {
+    children:   [ prompt,textbox-prompt-colon,entry,case-indicator ];
+}
+textbox-prompt-colon {
+    expand:     false;
+    str:        "Set Power Profile:";
+    margin:     0px 0.3em 0em 0em;
+    text-color: @normal-foreground;
+}
--- a/config/rofi/powermenu.rasi
+++ b/config/rofi/powermenu.rasi
@ -0,0 +1,124 @@
+/*******************************************************
+ * ROFI configs i3 powermenu for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+configuration {
+    font:            "Noto Sans Regular 10";
+    show-icons:      false;
+    icon-theme:      "Qogir";
+    scroll-method:   0;
+    disable-history: false;
+    sidebar-mode:    false;
+}
+
+@import "~/.config/rofi/arc_dark_transparent_colors.rasi"
+
+window {
+    background-color: @background;
+    border:           0;
+    padding:          10;
+    transparency:     "real";
+    width:            120px;
+    location:         east;
+    /*y-offset:       18;*/
+    /*x-offset:       850;*/
+}
+listview {
+    lines:     7;
+    columns:   1;
+    scrollbar: false;
+}
+element {
+    border:  0;
+    padding: 1px;
+}
+element-text {
+    background-color: inherit;
+    text-color:       inherit;
+}
+element.normal.normal {
+    background-color: @normal-background;
+    text-color:       @normal-foreground;
+}
+element.normal.urgent {
+    background-color: @urgent-background;
+    text-color:       @urgent-foreground;
+}
+element.normal.active {
+    background-color: @active-background;
+    text-color:       @active-foreground;
+}
+element.selected.normal {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+element.selected.urgent {
+    background-color: @selected-urgent-background;
+    text-color:       @selected-urgent-foreground;
+}
+element.selected.active {
+    background-color: @selected-active-background;
+    text-color:       @selected-active-foreground;
+}
+element.alternate.normal {
+    background-color: @alternate-normal-background;
+    text-color:       @alternate-normal-foreground;
+}
+element.alternate.urgent {
+    background-color: @alternate-urgent-background;
+    text-color:       @alternate-urgent-foreground;
+}
+element.alternate.active {
+    background-color: @alternate-active-background;
+    text-color:       @alternate-active-foreground;
+}
+scrollbar {
+    width:        4px;
+    border:       0;
+    handle-color: @normal-foreground;
+    handle-width: 8px;
+    padding:      0;
+}
+mode-switcher {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+}
+button {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+button.selected {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+inputbar {
+    spacing:    0;
+    text-color: @normal-foreground;
+    padding:    1px;
+}
+case-indicator {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+entry {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+prompt {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+inputbar {
+    children:   [ prompt,textbox-prompt-colon,entry,case-indicator ];
+}
+textbox-prompt-colon {
+    expand:     false;
+    str:        ":";
+    margin:     0px 0.3em 0em 0em;
+    text-color: @normal-foreground;
+}
+
+/*removes the text input line*/
+mainbox {
+  children: [listview];
+}
--- a/config/rofi/rofidmenu.rasi
+++ b/config/rofi/rofidmenu.rasi
@ -0,0 +1,135 @@
+/*******************************************************
+ * ROFI configs i3 Apps menu for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+configuration {
+    font:                "Noto Sans Regular 10";
+    show-icons:          true;
+    icon-theme:          "Qogir";
+    display-drun:        "Apps";
+    drun-display-format: "{name}";
+    scroll-method:       0;
+    disable-history:     false;
+    sidebar-mode:        false;
+}
+
+@import "~/.config/rofi/arc_dark_transparent_colors.rasi"
+
+window {
+    background-color: @background;
+    border:           0;
+    padding:          30;
+}
+listview {
+    lines:   10;
+    columns: 3;
+}
+mainbox {
+    border:  0;
+    padding: 0;
+}
+message {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+    padding:      1px;
+}
+textbox {
+    text-color: @foreground;
+}
+listview {
+    fixed-height: 0;
+    border:       8px 0px 0px;
+    border-color: @separatorcolor;
+    spacing:      8px;
+    scrollbar:    false;
+    padding:      2px 0px 0px;
+}
+element {
+    border:  0;
+    padding: 1px;
+}
+element-text {
+    background-color: inherit;
+    text-color:       inherit;
+}
+element.normal.normal {
+    background-color: @normal-background;
+    text-color:       @normal-foreground;
+}
+element.normal.urgent {
+    background-color: @urgent-background;
+    text-color:       @urgent-foreground;
+}
+element.normal.active {
+    background-color: @active-background;
+    text-color:       @active-foreground;
+}
+element.selected.normal {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+element.selected.urgent {
+    background-color: @selected-urgent-background;
+    text-color:       @selected-urgent-foreground;
+}
+element.selected.active {
+    background-color: @selected-active-background;
+    text-color:       @selected-active-foreground;
+}
+element.alternate.normal {
+    background-color: @alternate-normal-background;
+    text-color:       @alternate-normal-foreground;
+}
+element.alternate.urgent {
+    background-color: @alternate-urgent-background;
+    text-color:       @alternate-urgent-foreground;
+}
+element.alternate.active {
+    background-color: @alternate-active-background;
+    text-color:       @alternate-active-foreground;
+}
+scrollbar {
+    width:        4px;
+    border:       0;
+    handle-color: @normal-foreground;
+    handle-width: 8px;
+    padding:      0;
+}
+mode-switcher {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+}
+button {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+button.selected {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+inputbar {
+    spacing:    0;
+    text-color: @normal-foreground;
+    padding:    1px;
+}
+case-indicator {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+entry {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+prompt {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+inputbar {
+    children:   [ prompt,textbox-prompt-colon,entry,case-indicator ];
+}
+textbox-prompt-colon {
+    expand:     false;
+    str:        ":";
+    margin:     0px 0.3em 0em 0em;
+    text-color: @normal-foreground;
+}
--- a/config/rofi/rofikeyhint.rasi
+++ b/config/rofi/rofikeyhint.rasi
@ -0,0 +1,137 @@
+/*******************************************************
+ * ROFI configs i3 keyhint-menu for EndeavourOS
+ * Maintainer: joekamprad <joekamprad@endeavouros.com>
+ *******************************************************/
+configuration {
+    font:                "Noto Sans Regular 10";
+    show-icons:          false;
+    icon-theme:          "Qogir";
+    display-drun:        "KeyHint";
+    drun-display-format: "{name}";
+    scroll-method:       0;
+    disable-history:     false;
+    fullscreen:          false;
+    hide-scrollbar:      true;
+    sidebar-mode:        false;
+}
+
+@import "~/.config/rofi/arc_dark_transparent_colors.rasi"
+
+window {
+    background-color: @background;
+    border:           0;
+    padding:          30;
+}
+listview {
+    lines:   10;
+    columns: 1;
+}
+mainbox {
+    border:  0;
+    padding: 0;
+}
+message {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+    padding:      1px;
+}
+textbox {
+    text-color: @foreground;
+}
+listview {
+    fixed-height: 0;
+    border:       8px 0px 0px;
+    border-color: @separatorcolor;
+    spacing:      8px;
+    scrollbar:    false;
+    padding:      2px 0px 0px;
+}
+element {
+    border:  0;
+    padding: 1px;
+}
+element-text {
+    background-color: inherit;
+    text-color:       inherit;
+}
+element.normal.normal {
+    background-color: @normal-background;
+    text-color:       @normal-foreground;
+}
+element.normal.urgent {
+    background-color: @urgent-background;
+    text-color:       @urgent-foreground;
+}
+element.normal.active {
+    background-color: @active-background;
+    text-color:       @active-foreground;
+}
+element.selected.normal {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+element.selected.urgent {
+    background-color: @selected-urgent-background;
+    text-color:       @selected-urgent-foreground;
+}
+element.selected.active {
+    background-color: @selected-active-background;
+    text-color:       @selected-active-foreground;
+}
+element.alternate.normal {
+    background-color: @alternate-normal-background;
+    text-color:       @alternate-normal-foreground;
+}
+element.alternate.urgent {
+    background-color: @alternate-urgent-background;
+    text-color:       @alternate-urgent-foreground;
+}
+element.alternate.active {
+    background-color: @alternate-active-background;
+    text-color:       @alternate-active-foreground;
+}
+scrollbar {
+    width:        4px;
+    border:       0;
+    handle-color: @normal-foreground;
+    handle-width: 8px;
+    padding:      0;
+}
+mode-switcher {
+    border:       2px 0px 0px;
+    border-color: @separatorcolor;
+}
+button {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+button.selected {
+    background-color: @selected-normal-background;
+    text-color:       @selected-normal-foreground;
+}
+inputbar {
+    spacing:    0;
+    text-color: @normal-foreground;
+    padding:    1px;
+}
+case-indicator {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+entry {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+prompt {
+    spacing:    0;
+    text-color: @normal-foreground;
+}
+inputbar {
+    children:   [ prompt,textbox-prompt-colon,entry,case-indicator ];
+}
+textbox-prompt-colon {
+    expand:     false;
+    str:        ":";
+    margin:     0px 0.3em 0em 0em;
+    text-color: @normal-foreground;
+}
--- a/config/xfce4/terminal/accels.scm
+++ b/config/xfce4/terminal/accels.scm
@ -0,0 +1,58 @@
+; xfce4-terminal GtkAccelMap rc-file         -*- scheme -*-
+; this file is an automated accelerator map dump
+;
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-2" "<Alt>2")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-6" "<Alt>6")
+; (gtk_accel_path "<Actions>/terminal-window/copy-input" "")
+; (gtk_accel_path "<Actions>/terminal-window/close-other-tabs" "")
+; (gtk_accel_path "<Actions>/terminal-window/move-tab-right" "<Primary><Shift>Page_Down")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-7" "<Alt>7")
+; (gtk_accel_path "<Actions>/terminal-window/set-title-color" "")
+; (gtk_accel_path "<Actions>/terminal-window/edit-menu" "")
+; (gtk_accel_path "<Actions>/terminal-window/zoom-menu" "")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-1" "<Alt>1")
+; (gtk_accel_path "<Actions>/terminal-window/fullscreen" "F11")
+; (gtk_accel_path "<Actions>/terminal-window/read-only" "")
+; (gtk_accel_path "<Actions>/terminal-window/preferences" "")
+; (gtk_accel_path "<Actions>/terminal-window/reset-and-clear" "")
+; (gtk_accel_path "<Actions>/terminal-window/about" "")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-5" "<Alt>5")
+; (gtk_accel_path "<Actions>/terminal-window/close-window" "<Primary><Shift>q")
+; (gtk_accel_path "<Actions>/terminal-window/reset" "")
+; (gtk_accel_path "<Actions>/terminal-window/save-contents" "")
+(gtk_accel_path "<Actions>/terminal-window/toggle-menubar" "F10")
+; (gtk_accel_path "<Actions>/terminal-window/copy" "<Primary><Shift>c")
+; (gtk_accel_path "<Actions>/terminal-window/copy-html" "")
+; (gtk_accel_path "<Actions>/terminal-window/last-active-tab" "")
+; (gtk_accel_path "<Actions>/terminal-window/show-borders" "")
+; (gtk_accel_path "<Actions>/terminal-window/view-menu" "")
+; (gtk_accel_path "<Actions>/terminal-window/detach-tab" "<Primary><Shift>d")
+; (gtk_accel_path "<Actions>/terminal-window/scroll-on-output" "")
+; (gtk_accel_path "<Actions>/terminal-window/show-toolbar" "")
+; (gtk_accel_path "<Actions>/terminal-window/next-tab" "<Primary>Page_Down")
+; (gtk_accel_path "<Actions>/terminal-window/tabs-menu" "")
+; (gtk_accel_path "<Actions>/terminal-window/search-next" "")
+; (gtk_accel_path "<Actions>/terminal-window/search-prev" "")
+; (gtk_accel_path "<Actions>/terminal-window/undo-close-tab" "")
+; (gtk_accel_path "<Actions>/terminal-window/set-title" "<Primary><Shift>s")
+; (gtk_accel_path "<Actions>/terminal-window/contents" "F1")
+; (gtk_accel_path "<Actions>/terminal-window/zoom-reset" "<Primary>0")
+; (gtk_accel_path "<Actions>/terminal-window/close-tab" "<Primary><Shift>w")
+; (gtk_accel_path "<Actions>/terminal-window/new-tab" "<Primary><Shift>t")
+; (gtk_accel_path "<Actions>/terminal-window/new-window" "<Primary><Shift>n")
+; (gtk_accel_path "<Actions>/terminal-window/terminal-menu" "")
+; (gtk_accel_path "<Actions>/terminal-window/show-menubar" "")
+; (gtk_accel_path "<Actions>/terminal-window/select-all" "<Primary><Shift>a")
+; (gtk_accel_path "<Actions>/terminal-window/paste" "<Primary><Shift>v")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-9" "<Alt>9")
+; (gtk_accel_path "<Actions>/terminal-window/move-tab-left" "<Primary><Shift>Page_Up")
+; (gtk_accel_path "<Actions>/terminal-window/search" "<Primary><Shift>f")
+; (gtk_accel_path "<Actions>/terminal-window/file-menu" "")
+; (gtk_accel_path "<Actions>/terminal-window/prev-tab" "<Primary>Page_Up")
+; (gtk_accel_path "<Actions>/terminal-window/paste-selection" "")
+; (gtk_accel_path "<Actions>/terminal-window/zoom-in" "<Primary>plus")
+; (gtk_accel_path "<Actions>/terminal-window/zoom-out" "<Primary>minus")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-8" "<Alt>8")
+; (gtk_accel_path "<Actions>/terminal-window/help-menu" "")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-4" "<Alt>4")
+(gtk_accel_path "<Actions>/terminal-window/goto-tab-3" "<Alt>3")
--- a/config/xfce4/terminal/terminalrc
+++ b/config/xfce4/terminal/terminalrc
@ -0,0 +1,42 @@
+[Configuration]
+BackgroundDarkness=0.920000
+MiscSearchDialogOpacity=100
+MiscShowUnsafePasteDialog=FALSE
+BackgroundMode=TERMINAL_BACKGROUND_TRANSPARENT
+MiscAlwaysShowTabs=FALSE
+MiscBell=FALSE
+MiscBellUrgent=FALSE
+MiscBordersDefault=TRUE
+MiscCursorBlinks=FALSE
+MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK
+MiscDefaultGeometry=100x30
+MiscInheritGeometry=FALSE
+MiscMenubarDefault=FALSE
+MiscMouseAutohide=FALSE
+MiscMouseWheelZoom=TRUE
+MiscToolbarDefault=FALSE
+MiscConfirmClose=TRUE
+MiscCycleTabs=TRUE
+MiscTabCloseButtons=TRUE
+MiscTabCloseMiddleClick=TRUE
+MiscTabPosition=GTK_POS_TOP
+MiscHighlightUrls=TRUE
+MiscMiddleClickOpensUri=FALSE
+MiscCopyOnSelect=FALSE
+MiscShowRelaunchDialog=TRUE
+MiscRewrapOnResize=TRUE
+MiscUseShiftArrowsToScroll=FALSE
+MiscSlimTabs=FALSE
+MiscNewTabAdjacent=FALSE
+ColorForeground=#e3e3ea
+ColorBackground=#08052b
+ColorCursor=#ff7f7f
+ColorCursorForeground=#FFFFFF
+ColorBold=#7fbaff
+TabActivityColor=#81813d3d9c9c
+ColorCursorUseDefault=FALSE
+ColorBoldIsBright=FALSE
+ScrollingUnlimited=TRUE
+FontName=Source Code Pro 10
+ColorPalette=rgb(0,0,0);rgb(170,0,0);rgb(76,61,170);rgb(170,85,0);rgb(0,0,170);rgb(170,0,170);rgb(0,170,170);rgb(170,170,170);rgb(85,85,85);rgb(255,85,85);rgb(85,255,85);rgb(255,255,85);rgb(85,85,255);rgb(255,85,255);rgb(85,255,255);rgb(255,255,255)
+ScrollingBar=TERMINAL_SCROLLBAR_NONE